7 Reasons Why Whirlpool Dishwasher Stops Mid Cycle – KCSCFM Repair

Dishwashers are a necessary appliance in any home. They tend to have all sorts of problems, and one of the most common problems is that the Whirlpool dishwasher will stop mid-cycle.

When you put your dishes on the middle rack of your dishwasher and shut the door, you expect for your dishwasher to run through its cycles, but sometimes it stops mid-cycle with or without an error code.

The most likely cause is that the dishwasher is not draining properly. This can be caused by a clogged drain or a problem with the pump. Another possibility is that the water inlet valve is not working properly. This can be caused by a number of things, including a faulty valve or a clogged water line. If the dishwasher does not start at all, the problem may be with the power supply. Check to make sure that the dishwasher is plugged in and that the circuit breaker has not tripped.

You can check the manual of your dishwasher to check the cause of the problem. But, in this article, we are going to explain various reasons why the Whirlpool dishwasher stops mid cycle.

Whirlpool Dishwasher Stops Mid Cycle – Troubleshoot And Diagnosis

Whirlpool dishwashers are a popular laundry appliance made by Whirlpool Corporation. There are several reasons why your Whirlpool dishwasher might suddenly stop in the middle of its cycle, each requiring a different solution.

We’ll explain the most common issues people have with their Whirlpool dishwashers and what you can do to fix them in future!

1. Dishwasher Door Not Securely Closed

If your Whirlpool dishwasher stops mid cycle, it’s likely because the dishwasher door is not securely closed. To fix this problem, check the following:

• Make sure the dishwasher door is fully closed. If it’s not, push it until it clicks into place.
• Check the latch on the dishwasher door to make sure it’s engaged. If it’s not, engage the latch and try closing the door again.

If the issue persists, try resetting the dishwasher by turning it off at the breaker box and then back on again.

2. Door latch issue

If your Whirlpool dishwasher has stopped mid cycle, it’s likely due to an issue with the door latch. The door latch is responsible for keeping the door sealed during the dishwashing cycle. If the latch is not working properly, it can cause the dishwasher to stop mid cycle.

There are a few things you can do to fix a door latch issue. First, check to make sure that the door is fully closed and that the latch is engaged. If the door is not fully closed, simply push it shut and make sure that the latch is in the locked position. If this doesn’t fix the problem, you may need to adjust the strike plate. The strike plate is what keeps the door latched shut. You can usually find it on the frame of the dishwasher near the top of the door opening. Simply loosen or tighten the screws until the door stays shut when latched.

If these tips don’t fix your Whirlpool dishwasher’s mid cycle stopping issue, you may need to replace the door latch assembly. This is a more difficult repair and will require disassembling your dishwasher. We recommend calling a professional appliance repair technician to handle this repair.

3. Circuit Breaker or Fuse Problem

If your Whirlpool dishwasher suddenly stops mid cycle, it could be due to a problem with the circuit breaker or fuse. This is a relatively easy problem to fix, but it’s important to identify the root cause so that it doesn’t happen again in the future.

First, check to see if the circuit breaker has tripped. If it has, simply reset it and try running the dishwasher again. If the problem persists, then you may need to replace the fuse. This is usually a quick and easy fix, but be sure to consult with an electrician or appliance repair professional before attempting this on your own.

Once you’ve identified and fixed the issue, your dishwasher should run through its cycle without any further problems.

4. Soap dispenser issue

It could be due to an issue with the soap dispenser. The most common cause of this problem is a faulty dispenser latch.

If the latch is not secure, the soap dispenser will not open and the dishwasher will not dispense soap.

Another possible cause is a clogged soap dispenser. If the dispenser is clogged, the dishwasher will not be able to dispense soap. To fix this problem, you will need to clean the soap dispenser and make sure that the latch is secure.

5. Water supply issues

There are a few reasons why your Whirlpool dishwasher may stop mid cycle.

One reason could be that there is a problem with the water supply.

If the water pressure is too low, the dishwasher may not be able to operate properly.

Another possibility is that the water supply line is blocked or kinked, which can restrict the flow of water to the dishwasher.

If you suspect that your dishwasher is not getting enough water, check the water pressure at your home and make sure it meets the minimum requirements for your model of dishwasher.

You can also check the water supply line for any blockages or kinks. If you find any, clear them away so that water can flow freely to your dishwasher.

6. Motor issue

The motor is responsible for powering the dishwasher through its cycles, so if it stops working properly, the dishwasher will not be able to finish its cycle. There are a few things that you can do to troubleshoot this problem:

First, check to make sure that the power cord is plugged in properly and that the outlet has power. If the cord is loose or the outlet isn’t working, that could be why the dishwasher stopped.

Next, take a look at the motor itself. If it seems like it’s frozen or not moving, you may need to replace it.

If the motor seems to be running but the dishwasher isn’t moving through its cycle, there may be an issue with one of the belts that connects the motor to other parts of the dishwasher. These belts can sometimes become worn or damaged and will need to be replaced.

Once you’ve determined what is causing your dishwasher to stop mid cycle, you can either attempt to fix it yourself or call a repairman. If you have any doubts about your ability to fix the problem, it’s always best to err on the side of caution and call in a professional.

7. Thermal fuse issue

The thermal fuse is a safety device that is designed to shut off the power to the dishwasher if it gets too hot. If the dishwasher gets too hot, it can cause a fire.

If your dishwasher stops mid cycle, first check to see if the thermal fuse has been tripped. To do this, open up the control panel and locate the thermal fuse. It will be located near the heating element. If the thermal fuse has been tripped, you will need to replace it before you can use the dishwasher again.

If you have replaced the thermal fuse and the dishwasher still stops mid cycle, there may be another issue causing the problem. Check all of the wiring and connections to make sure they are secure and not damaged. If everything looks good, then you may need to call a professional for further diagnosis.

8. Wiring issue

This can be caused by a number of things, including a loose wire or a problem with the electrical connection.

If you suspect that a wiring issue is the cause of your dishwasher’s sudden stoppage, the first thing you should do is check the wires for any signs of damage. If you see any frayed or broken wires, they will need to be replaced.

Once you have checked the wires, you will need to make sure that the electrical connection is secure. This can be done by checking the outlet that the dishwasher is plugged into. If the connection is loose, you will need to tighten it.

If you have checked both the wires and the electrical connection and neither appears to be the problem, it is possible that there is an issue with the dishwasher itself. In this case, it will need to be repaired or replaced.

9. Drainage issue

There are two possible areas where the dishwasher could be draining improperly: the sink and the disposal. Check both to see if they are clear of any obstructions. If they are, then it’s likely that the dishwasher itself is draining improperly.

To clean out the dishwasher drain, remove any food or other debris from the catch basin at the bottom of the machine. Then, use a plunger or snake to clear any blockages in the drain hose. Once you’ve done that, run some water through the machine to see if it drains properly.

If your dishwasher still stops mid cycle after checking these things, then there may be an issue with the float switch assembly. This part is responsible for sensing when water has reached a certain level and shutting off accordingly. If it isn’t working properly, it could cause your dishwasher to stop mid cycle even when there isn’t any water left in the tub.

10. Fan Assembly Issue

The purpose of the fan assembly is to circulate air around the dishwasher, providing cool airflow to prevent the dishwasher from overheating.

If the fan assembly is not working properly, it can cause the dishwasher to overheat and stop mid cycle. To fix this issue, you will need to replace the fan assembly with a new one.

You can find replacement fan assemblies for Whirlpool dishwashers online or at most major appliance stores. Once you have replaced the fan assembly, your dishwasher should operate normally.

Conclusion

There are a few reasons why your Whirlpool dishwasher may stop mid cycle. It could be due to a power outage, a clogged drain, or even simply because the door was opened during the cycle.

Whatever the reason, it’s important to troubleshoot the issue so that you can get your dishwasher back up and running again.

We hope that our tips have helped you figure out what’s causing your dishwasher to stop mid cycle and how you can fix it.