GE Washing Machine Squeaking Noise When Agitating – Let’s Fix It

If your GE washing machine is making a squeaking noise when it agitates, you’re probably wondering what’s going on and how to fix it. Don’t worry, you’re not alone.

Many people have this same problem. The good news is that there are some things you can do to fix the issue.

When your washer squeals during the agitating cycle, first you must determine whether something is lodged underneath the agitator. Usually, loose items in your wash and overfilling the machine is all that’s necessary to resolve this issue. However, it can also be caused by excess water in the tub or broken belts.

Fixing a squeaking noise in your washer can be quite challenging. But don’t worry. By reading this guide, you will know the most likely causes for the washer to make that noise and how to address them with ease.

GE Washing Machine Squeaking Noise When Agitating – Troubleshoot And Diagnosis

Fixing a squeaking noise in your washer can be quite challenging. But don’t worry. By reading this guide, you will know the most likely causes for the washer to make that noise and how to address them with ease.

1. Overloading

If your GE washer is squeaking when agitating, it’s likely because there are too many items inside. Overloading the washing machine can cause damage to the motor and bearings, leading to a noisy cycle.

To avoid this, always check the manufacturer’s instructions to see how much laundry your machine can handle. If you’re still having trouble, try washing smaller loads more frequently.

Overloading the washer is one of the most common reasons for this type of problem. So, be sure to check that you’re not putting too many items in before you start a load.

If your GE washer is overloaded, it can cause the machine to work less efficiently and may even lead to damage. To avoid overloading, follow these simple tips:

• Only wash full loads of laundry. A full load is typically about 16 pounds.
• If you’re washing a smaller load, adjust the water level accordingly.
• Be sure to evenly distribute the laundry throughout the washer tub. This will help prevent uneven washing and potential damage to clothing.
• Avoid packing the laundry too tightly into the washer tub. This will allow the water and detergent to circulate more freely and effectively clean your clothes.

By following these tips, you can help ensure that your GE washer runs properly and your clothes come out clean and damage-free.

2. The Agitator Is Obstructed

An agitator is a device in a washing machine that helps to clean clothes by moving them around in the water. The function of an agitator is to create turbulence in the water, which helps to suspend the dirt and stains in the water so they can be removed during the wash cycle.

Some washing machines have an agitator that is built into the tub, while others have a removable agitator that can be taken out for cleaning.

A squeaking noise is likely due to an object being stuck in the agitator. To fix this, first identify what’s causing the noise. If it’s a small object, like a coin or button, you can remove it yourself. However, if the object is bigger or wedged in too tightly, you’ll need to call a repair person.

Once you’ve identified the cause of the noise, take care of it immediately. If you don’t, the problem will only get worse and could eventually damage your washing machine. Fixing a squeaking noise is usually a quick and easy fix that doesn’t require any special tools or knowledge.

If your washing machine’s agitator is stuck, there are a few things you can do to try to fix the issue. First, check to see if there is anything caught in the agitator that may be causing it to be stuck.

If there is something caught, try to remove it carefully. If the agitator is still stuck, you may need to use a plunger to try to dislodge whatever is causing the issue.

If none of these methods work, you may need to call a professional for help.

3. Worn Out Drive Belt

A drive belt is a crucial component in a washer. Its function is to provide power to the washer’s pump and agitator. The drive belt is located under the washer tub and is connected to the motor.

If the drive belt becomes worn or damaged, it can cause the washer to stop working properly.

The drive belt is a loop of rubber that connects the motor to the washing machine’s drum. Over time, the belt can become stretched or frayed, causing it to slip or make noise.

If you notice your washing machine making a squeaking noise when it agitates, check the drive belt for signs of wear. If the belt is damaged, it will need to be replaced.

To replace the drive belt, you’ll need to remove the access panel and disconnect the electrical power before removing the old belt and installing the new one.

4. Dirty Or Damaged Pulleys

A pulley is a simple machine that uses grooved wheels and a rope to lift or move objects. Pulleys are often used in washing machines to move the drum or agitator.

The pulley system in a washing machine helps to evenly distribute the load, making it easier on the motor and extending the life of the machine.

The pulleys are located under the washer top and can become clogged with lint or debris over time. If the pulleys are damaged, they may need to be replaced.

You can clean the pulleys yourself by removing the washer top and using a brush to remove any build-up. If the damage is severe, you’ll need to call a repairman to replace the pulleys.

5. Clutch Assembly Is Worn Out

In a GE washing machine, the clutch assembly is responsible for transferring power from the motor to the transmission. The clutch assembly consists of a clutch plate, a pressure plate, and a spring.

The pressure plate is attached to the motor shaft and the clutch plate is attached to the transmission.

When the motor is turned on, the pressure plate presses against the clutch plate, causing the transmission to turn. The spring helps to release the pressure on the plates when the motor is turned off.

If your GE washing machine is making a squeaking noise when it agitates, it’s likely due to a worn out clutch assembly. This problem is common in older washing machines and can be fixed relatively easily.

To fix a squeaking GE washing machine, you’ll need to replace the clutch assembly. This part is relatively inexpensive and can be found at most hardware stores. Replacing the clutch assembly is a fairly simple process, and can be done in about an hour.

This guide will show you how to do just that.

First, you’ll need to gather the following tools: a putty knife, a Phillips head screwdriver, a small flathead screwdriver, and pliers. You’ll also need a new clutch assembly.

Once you have everything you need, unplug your washer and prop open the lid. Locate the three screws holding down the clutch assembly and remove them with your Phillips head screwdriver. Then, use your putty knife to pry off the old assembly.

Next, take your new clutch assembly and line up the holes with the screws. Screw it in place using your Phillips head screwdriver.

Final Thoughts

In conclusion,if your GE washing machine is making a squeaking noise when agitating, there are several potential causes. First, check to see if anything is caught in the agitator blades. If not, then the issue is likely with the transmission, agitation shaft, or motor.

Thankfully, these parts are all covered by GE’s warranty. So, if your washing machine is still under warranty, contact GE for assistance.