4 Reasons Why KitchenAid Ice Maker Light Blinking – Let’s Fix It

Are you one of those people who love the convenience and luxury of a home ice maker, but can’t help feeling overwhelmed when their KitchenAid Ice Maker light starts blinking? Don’t panic!

We’ve got you covered with this blog as we take you through all the possible causes and solutions to get your blinking light under control. So read on and let us be your guide as we explore why that pesky KitchenAid ice maker light won’t stop flashing – and how to fix it!

When the KitchenAid Ice Maker light blinks, it indicates an issue with the ice production cycle. This could be caused by a few different things such as improper water supply connection or failure of one of the components in the system.

To troubleshoot, start off by checking if there is enough pressure within your home’s water line and that all connections are secure. If these appear to be okay, move on to examining each component within the system; this includes testing sensors, switches and solenoids for proper operation.

Additionally, make sure both air filter screens are completely clean and check for any blockages which may have accumulated over time from frozen sediment build up or calcium deposits.

Finally, verify that no foreign objects have been trapped in any parts of your Ice Maker before resetting it back into its normal operating mode in order to resume functioning correctly again.

KitchenAid Ice Maker Light Blinking – Troubleshoot And Diagnosis

Let’s see the solution.

1. Low Water Supply

If the light on your KitchenAid ice maker is blinking, it could be due to a low water supply.

This is a common problem that can be caused by a variety of factors, including a clogged water filter, a faulty water inlet valve, or a kink in the water supply line.

To fix this problem, first check to make sure that your water supply is turned on and that there is enough water flowing through the line. If the water supply is adequate, then check for any clogs or kinks in the line and replace or fix them as needed.

If the water inlet valve is faulty, you may need to replace it. If the problem persists, it is recommended that you contact a certified KitchenAid repair technician for assistance.

2. Change Water Filter

If the light on your KitchenAid Ice Maker is blinking, chances are you need to change out the water filter.

It is important to note that the water filter should be changed every six months or sooner if it becomes clogged or dirty.

This will ensure that you have clean and fresh-tasting ice from your ice maker.

To replace the water filter, first, locate it by referring to your owner’s manual. Turn off the power before removing the old filter. Once it has been removed, take note of how it was installed so that you can do a proper installation of its replacement.

Install the new one according to the instructions in your user manual then turn on the power to reactivate your ice maker.

After a few moments of operation, check if any lights remain blinking; if they do, refer back to the manufacturer’s instructions for further troubleshooting steps.

3. Check Optic Sensor

In many cases, the problem can be attributed to an optic sensor that has become blocked or clogged. The optic sensor plays an essential role in regulating the production of ice cubes and ensuring that it operates correctly.

To check if this is the source of your issue, first unplug your KitchenAid machine and remove any excess ice from the tray. Then locate the optic sensor on your unit and use a cloth to wipe away any residue or hard water deposits that may have built up over time.

If necessary, you can also use a cotton swab dipped in warm water to clean more stubborn areas around the optical lens of the sensor.

Once you have ensured that all deposits are removed, plug in your appliance again and check if this has resolved your blinking light problem.

4. Reset The Ice Maker

The KitchenAid ice maker reset is a simple process that can be completed in just a few steps. If the light on your KitchenAid ice maker is blinking, it could be a sign that the ice maker needs to be reset. This is a common problem that can be caused by a variety of factors, including a jammed ice maker, a faulty switch, or a malfunctioning ice maker sensor.

To reset your KitchenAid ice maker, follow these steps:

1. Make sure that the manual switch on the ice maker is in the on position. This switch is typically located on the front of the ice maker and should be clearly marked.
2. Tap the plastic tab on the door jamb. This will signal the light on the ice maker to turn off.
3. Shut the freezer door and allow it to reset for 10 seconds. This will give the ice maker time to reset itself and clear any errors that may be causing the light to blink.
4. Open the freezer door and press the door’s switch three times. This will reset the ice maker’s sensor and help clear any remaining errors.
5. Shut the freezer door and let the ice maker sit for a few seconds to complete the reset process.

Conclusion

We’ve looked at the reasons why your KitchenAid ice maker light might be blinking, from a malfunctioning control board to an overly full bin.

To enjoy smooth operation and delicious ice cubes, it is essential that you identify the cause of the issue and take corrective action accordingly.

We hope this blog has given you some insight into potential issues so you can make sure your next glass of iced-tea isn’t accompanied by a bright blinking light!