LG Washer Stuck On Spin Cycle 9 Minutes [Quick Fix]

If you have an LG washer, you may have experienced the frustration of having your washer stuck on the spin cycle for 9 minutes. This can be a real pain, especially if you have a load of laundry that needs to be done. There are a few things that you can do to try to fix this problem.

Laundry can be a pain, but it’s a whole lot easier with a reliable washing machine. That’s why so many people choose an LG washer – they’re some of the most popular machines in the world. But even the best washers can have problems from time to time, like getting stuck on the spin cycle without draining or rinsing.

Fortunately, there are a few steps you can take to fix the problem yourself. Here’s how to troubleshoot the spin cycle on a LG washing machine.

LG washers have a tendency to keep going through the spin cycle when their water is not draining. This is often caused by broken sensors or malfunctioning components — which can be corrected through a hard reset. However, you might need to purchase new components in order to permanently fix the problem.

LG Washer Stuck On Spin Cycle 9 Minutes – Troubleshoot And Diagnosis

LG Washer Stuck On Spin Cycle 9 Minutes

When your washer makes repetitive spin cycles and your clothes do not get dried, they will become wet without completing this task. That, along with creating more water waste than necessary, is disastrous for the environment and, in the long run, your water bill.

You know you have to repair the washer once you notice defective performance.

You should troubleshoot your LG washer to stop the spin cycle. Here’s How to repair your LG washer.

1. Do A Hard Reset

To Fix LG Washer Stuck On Spin Cycle, do a hard reset. This will reboot your LG washer, and reset all of the sensors, but you won’t lose any of your settings. To do a hard reset, follow these steps:

Unplug the washer power cord. Wait 15 minutes. Plug the washer back in. Press the power button, and hold it for 5-10 seconds. Release the button. The machine should start up. 

Turn off the LG Washer and let’s see if the problem persists. By turning this process on and off, you may discover that the issue is solved. If the problem relates to the machine itself, it may stem from a malfunctioning sensor or component.

2. Unlocked Lid

If your LG washing machine’s door is stuck in the locked position and you can’t open it, don’t panic. This problem is usually caused by an unlocked door or a faulty door interlock switch.

To fix this problem, you’ll need to check the door and the door switch for any damage. If there is no damage, then you can try resetting the machine by unplugging it from the power outlet and then plugging it back in.

See also  7 Reasons Why Samsung Washer Not Spinning

First, check to see if there is anything blocking the washer from spinning. If there is nothing blocking the washer, then the next step is to check the lid lock switch. If the lid lock switch is defective, it will need to be replaced.

3. Defective Timer

It’s the middle of laundry day and your LG washer is stuck on the spin cycle. For nine minutes, the washer has been trying to spin the wet clothes inside, but the timer is defective and won’t move on.

It’s a frustrating experience, but luckily there are some things you can do to fix the problem.

If your LG washer is stuck on the spin cycle, first check to see if the timer is defective.

If it is, you’ll need to replace it.

This is a fairly easy repair that you can do yourself. Simply order a new timer from LG and follow the instructions in the owner‘s manual to install it.

To do this, unplug the washer and remove the back panel. Locate the timer and disconnect it from the power supply. Install a new timer and reassemble the washer.

4. Drain Filter Is Clogged

If your LG washing machine is stuck on the spin cycle for 9 minutes, it may be due to clogged drain filters. To clean the filters, start by unplugging the washer from the power outlet. Then, remove the drain hose from the back of the washer and check for any blockages.

If you find any, use a pliers to remove them. Once the filters are clear, reattach the drain hose and plug the washer back in.

5. Malfunctioning Sensors

If your LG washer is stuck on the spin cycle for 9 minutes, it may be due to a malfunctioning sensor.

Sensors are responsible for telling the washer when to start and stop the spin cycle, so if they‘re not working properly, the washer can get stuck. There are a few things you can try to fix the problem:

  1. Clean the sensors. Sensors can sometimes get dirty, which can cause them to malfunction. Try cleaning the sensors with a soft cloth and see if that fixes the problem.
  2. Replace the sensors. If cleaning the sensors doesn‘t work, you may need to replace them. Sensors are not expensive, and you should be able to find them at most hardware stores.
  3. Call a repairman. If you can‘t fix the problem yourself, you may need to call a repairman. Washer repairs can be expensive, so you may want to consider buying a new washer instead.
See also  Why GE Washer Won't Start [Causes And Solution]

We will show you how to test and replace a broken sensor in your LG washer.

First, you will need to unplug the washer from the power outlet. Next, locate the sensor on the back of the washer. Once you have found the sensor, gently pull it out of its socket.

Now, take a multimeter and set it to the ohmmeter setting. Place one lead of the multimeter on each of the terminals on the sensor. If the reading on the multimeter is infinite, then this means that the sensor is broken and needs to be replaced.

To replace the sensor, simply insert a new one into the socket and reattach it to the power outlet.

6. Worn Out Drive Belt

A drive belt is a part of an LG washer that helps to rotate the drum. The drive belt is located between the motor and the drum. The drive belt helps to rotate the drum during the wash cycle. The drive belt also helps to keep the drum in place during the spin cycle.

The most common reason for an LG washer to get stuck on the spin cycle is that the drive belt is worn out. This belt helps to rotate the drum during the spin cycle. When it gets worn out, it can slip and cause the washer to get stuck.

If your LG washer is getting stuck on the spin cycle, first check to see if the drive belt is worn out. If it is, you’ll need to replace it. You can find replacement drive belts at most hardware stores or online.

If your drive belt is worn out, it will need to be replaced. Here are the steps you’ll need to take to replace the drive belt in your LG washer:

  1.  Unplug the washer from the power outlet and shut off the water supply.
  2. Remove the screws that secure the back panel to the washer.
  3. Disconnect the wire harnesses from the back of the control panel.
  4. Take off the old drive belt by removing it from the pulleys.
  5. Put on the new drive belt, ensuring it’s aligned correctly on all the pulleys.
  6. Reconnect all of the wire harnesses and screw in the back panel.
  7. Turn on both water supplies and plug in your washer to test it out!

8. Overloading

If your LG washer is stuck on the spin cycle, it may be due to overloading. To fix this, you will need to unplug the washer and remove the clothes.

See also  Whirlpool Washer Door Locked Light Flashing - Let's Fix It

Once the clothes have been removed, you will need to clean out the washer’s tub. After the tub has been cleaned, you can plug the washer back in and turn it on.

If your washer is overloaded, it can cause the machine to stop working properly. There are a few things you can do to prevent your washer from becoming overloaded.

First, be sure to evenly distribute your laundry load in the washer. Do not pack too much laundry into the machine as this will cause it to work harder and could lead to an overload.

Second, select the correct water level for your load size. If you put too much water into the machine, it will take longer for the clothes to wash and could lead to an overloaded condition.

Third, use the appropriate cycle for your type of laundry. Some cycles are longer than others and using a shorter cycle when you have a heavy load could cause the washer to become overloaded.

9. Clogged Drain Hose

If your LG washer is stuck on the spin cycle for 9 minutes, it is likely due to a clogged or kinked drain hose. The first thing you should do is check the drain hose for any blockages or kinks. If you find any, simply remove them and your washer should start working again.

While this may seem like a daunting repair, it’s actually quite easy to fix.

Start by unplugging the washing machine from the power outlet. Then, remove the front panel of the machine so you can access the drain hose. Using a plunger, clear any debris that may be blocking the hose.

Once the drain hose is clear, reassemble the washing machine and plug it back in. Your LG washer should now operate as normal. If you’re still having trouble, we recommend calling a professional for assistance.

Final Thoughts

In conclusion,if your LG washer is stuck on the spin cycle for 9 minutes, there are several things you can do to fix the problem. First, check the door seal and make sure it is clean and free of debris.

Next, check the drain hose for any kinks or blockages. Finally, clean the lint filter and make sure the air vent is not blocked.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top