[FIXED] Samsung Washer OE Error Code – KCSCFM Repair

Samsung washer OE error code is a result of an OVERFILL issue. Samsung has put this error code on the washing machine display to alert you that your Samsung washer can’t fill with water because it’s already full. 

It is usually triggered by one or more items blocking the drain hole, which can be resolved by removing the obstruction and resetting your Samsung washing machine.

Samsung has long been a leader in innovation and quality, which is why Samsung customers are so loyal. Samsung realizes that sometimes even its best efforts can’t prevent certain problems from occurring. 

This blog post will provide you with some steps to take to fix this Samsung washer OE code problem.

What Does The Samsung Washer OE Error Code Mean?

If an OE error displays on your Samsung washing machine, don’t worry — there are multiple checks that you can run to identify and repair any issues.

The error message usually pops up five minutes after the cycle begins — but it might sometimes appear right at the start.

If the OE error code appears on your Samsung washing machine display, it implies that the washer is overflowing.

If you’re washing a load of clothes and all of a sudden the water stops flowing, it means that your washing machine’s OE code has activated. What does this mean? The abbreviation stands for “Overflow Error”. While this is usually an easy fix, it can be very different from one washing machine to another.

If the water level is detected to be too high in a Samsung washing machine, it will overflow. This will stop the washing machine from running and turning on the pump to drain the water.

How To Fix Samsung Washer OE Error Code

Whether your washing machine is overflowing or your water is stopping, there are a few things you can do before calling in the professionals. Flipping the circuit breaker is one of the easiest ways to assess if there’s an electrical problem, and turning off the water supply at its source (be it your sink or hose bib) can provide valuable insight.

By taking the right measures and following the manufacturer’s directions for loading, you can avoid this issue at home.

Washer is Overloaded

Don’t just shove your laundry in: although it may seem like a time-saver, you’ll end up having to do more loads, and more time will be wasted that way. The Samsung washer gives you a clean and durable finish while saving up to 20 minutes per load.

Overstuffing your washing machine can cause serious damage to it and cause an overflow. The risk is higher if you have a top-load washing machine, but too many items can damage even front-loaders. Overfill, and you could cause the fill sensor to malfunction or break the agitator, both of which are a recipe for serious malfunction.

Using the Wrong type of Detergent

High-efficiency washing machines boast an impressive ability to clean almost any load without sacrificing water or power. However, their efficiency comes at a cost: they may require specific detergents to maintain optimal performance. 

Overflowing laundry is a common problem, but it doesn’t have to be. One of the major causes of overflow is using too much washing powder or liquid — too much powder can cause excessive foam or build-up, which can clog your machine or prevent the washer from draining properly. 

Always follow the dosage instructions on the labels of your washing powder and detergents, as well as on your machine’s manual.

Clogged or Kinked Drain Hose

If you’re having trouble with your washing machine filling up with water, it’s possible that materials have gotten stuck in the drainage hose. You can easily fix this yourself by pulling the washing machine out from the wall and looking at the drain hose. Blow into it to clear any blockage, and then reattach it to the waste pipe.

Inspect your washer hose for visible damage. Ensure that there are no cracks or worn areas that could allow water leakage. If you notice any damage, seal the hole with a repair kit or replace the hose entirely.

Check Water Level Switch

The water level and temperature switches tell the washer when to fill the tub, which is needed for every cycle — even the heavy-duty cycle. These switches also tell the motor to start and stop shaking so clothes can get clean. The water level switch keeps your washer safe from flooding and automatically sets the temperature of your water.

As the machine fills with water during a cycle, the switch turns off the supply when it hits its correct amount. The signal then moves onto the motor, giving it permission to start agitating.

First, check the pressure switch. This keeps an eye on the water level and tells your machine to stop filling when it has enough water in its tub. If the water stops running after you unplug the washer, it implies there is a problem with the pressure switch. The tube connected to the switch may have fallen off or gotten clogged.

Faulty Water Inlet Valve

If you can’t find any problems with the pressure switch, take a look at the water inlet valve. If water continues to flow into the washing machine even after you turn it off, then there may be a problem with the inlet valve.

Make sure your washing machine’s water inlet valve is functioning properly to ensure that the machine gets the right amount of water at its various cycles. Malfunctioning valves will make the machine use too much — or too little — water, resulting in an improper wash or rinse cycle.

If the water inlet valve is defective, then replace it.

Control module failure

Sometimes the Samsung washer malfunctions and issues a temporary error code. This is an easy fix: first, make sure that all of your plumbing lines are properly connected and that the drain hose is not clogged. If the problem persists, unplug the washer from its power source for a few minutes and then plug it back in. 

This will reset the washer to its initial factory settings, thus canceling the temporary Samsung Washer OE error code.