Why is My Sony TV Remote Not Working [SOLVED] – Let’s Fix It

This article will tell you How to Fix Sony TV Remote Not Working issue. Sony is a well-known company in the world of electronics and home appliances. The company offers a wide range of products such as smart phones, TV, and other electronics, but the quality of this product may vary. Thus, if you are using Sony TV and having trouble using Sony TV Remote then you are at the right place.

When troubleshooting a remote control, batteries of course come to mind. But if your remote still isn’t working, it’s time to delve deeper into the problem. Is there an obstacle between your TV and the remote? Have you placed the batteries incorrectly? Also, try pairing the remote with your TV again — perhaps it has been disconnected during a power failure or some other event.

If your remote still doesn’t work, try these troubleshooting steps.

Sony TV Remote Not Working – Troubleshoot and Diagnosis

Today, we’re going to walk you through the most common problems with TV remotes and how to solve them. We’ve got solutions on everything from failing to pair your remote to just not being able to turn it on without a fuss.

1. Change the Batteries

TV remotes aren’t causing the problems you think they are. Common issues with the device are actually related to the batteries. For example, the remote will stop working at random times, or it just won’t respond when you press a button.

When your TV remote stops working, rather than skimp on investing in a new one, it’s actually a lot easier to replace the batteries than you may think.

Got a remote that’s not working? Here is what you can do:

1. If you are having trouble with your remote, take out the batteries and press the power button for ten seconds. This resets the remote, removing any residual power.
2. Put the batteries back in your remote control after at least a FULL minute of not using it.
3. when you reinsert the TV remote batteries, make sure they are placed according to the polarity (+ and -).
4. Use the remote to control your TV and check if its working again.

If your remote isn’t responding, try replacing the batteries to see if it ends the issue. If that doesn’t work you can see if an alternate method will help.

2. Remove Any Obstacles That Is Blocking Remote Signal

Transmitters and receivers are the two parts of a television remote. With a transmitter, you can send a command from your remote to your TV using infrared technology. The receiver then “listens” for the signal and passes it on to the TV.

To avoid problems with a TV remote, make sure there aren’t any obstacles blocking the TV’s receiver. If you’re placing a object or picture frame on your TV stand, or if anything nearby is in front of your Sony TV, move them out of the way.

If the aforementioned steps don’t work, there is one other thing that can be done. You can try reducing the distance between the TV and the remote. If you have a long living room, moving the TV closer to your couch might help. In some cases, it’s due to thick carpeting or a pile of stuff underneath the couch holding down the remotes.

3. Remote Buttons Not Responding

When you’re watching a movie or gaming and suddenly your remote stops working, the first thing you do is give it a quick shake to see if some of the buttons are jammed. This will often get the unresponsive button working again, but if it doesn’t, unfortunately, that usually means that those buttons aren’t actually broken — they just require a simple reset before they start working correctly again.

One way to tell if a button on your Sony remote is in need of replacing is to take out your phone and open up the camera. Hold your remote in front of the camera and press the button you think might be broken. Yes, it does sound a little silly, but it works! Your smartphone’s camera should pick on the infrared sensor on your remote and if the button is working correctly, you’ll see a flash of light.

If you’re still getting no flashing lights, then you may have a broken button. This can happen, especially when you drop your TV remote. You could try pressing the button over and over again until the button comes unjammed.

4. Power Reset your Sony TV

If you’re having trouble with your Sony TV, the first step is to check that your remote is functioning properly. If it works, then the problem is with your Sony TV.

If the remote is not responding, try unplugging your TV, waiting a few minutes, and then plugging it back in (if possible). Be sure to wait two minutes before plugging it in again. If your TV is wireless, check that a cordless phone, microwave oven, or other wireless devices aren’t interfering with the remote’s signal. If possible, move your television away from these devices to see if they are affecting the remote’s performance.

5. Update TV Firmware

Software updates are an important part of maintaining a smart TV, and if you’re not sure about the current version of your software, it’s time to check. Software updates come in all shapes and sizes — from minor security fixes to major feature additions.

Did you know that software updates aren’t just for computers? Smart TVs can also benefit from firmware updates to optimize performance, security, and usability.

It’s important to take care of your TV. Like any device, it needs regular updates to keep it connected and running smoothly, your remote will thank you.

The easiest way to update is through the ‘Settings’ option on your TV’s overlay. Select the ‘Support & Settings’ option and then follow the prompts to check for software updates before proceeding with the update process.