Whirlpool Cabrio Dryer PF Code [Quick Solution]

Whirlpool Cabrio Dryer has one of the best dryers on the market and is an excellent addition to any home. However, it is not immune to issues and problems, including PF code issues. Here, we’ll take a closer look at what PF code means and how to fix it.

PF error means the dryer couldn’t continue with the cycle because a power failure occurred during the wash cycle.

If you’re having trouble with your cycle, there are a few things you can do. First, try pressing the start button to continue the cycle or pressing the pause/cancel button to clear the error from the display.

It’s a very important programming that can prevent laundry damage and is something you should be aware of in case it happens while your washing machine is running.

Whirlpool Cabrio dryer error code PF means power failure or a bad part. If the dryer is working fine and it still has the same error code, you should check all of your home wiring like outlets and switches. Also, check that nothing is blocking the dryer vent and check the dryer cord to make sure it isn’t loose.

If the problem continued when you plugged the dryer back in then your main board will need to be replaced.

Whirlpool Cabrio Dryer PF Code – Troubleshoot And Diagnosis

The PF error is a code indicating a problem with the main control board. This can be caused by an improperly grounded power supply, an electrical surge that damages the circuitry on circuit boards.

With a portable power supply or surge protector nearby, owners can typically reset their machines with the short jumper wires to restore normal operation.

1. Do A Soft Reset

You may need to perform a whirlpool cabrio dryer reset, then you can return to using your dryer again. To do so, unplug the appliance by pushing the plug all the way into the outlet and wait for five minutes.

This will reset the main board and hopefully fix the problem.

2. Press Pause/Cancel Button

To clear the error on the Whirlpool Cabrio’s dryer display and restart the cycle, press the pause/cancel button. If it happens again, check to see if the fuse/breaker at the panel is blown or tripped. If so, you may need to replace it.

The dryer will not cycle because of a lack of power. Check the fuse and breaker first, they should be securely fastened and in good working order.

3. Check Dryer Cord

Dryer outlet on the wall, appliance cord plugged into the dryer and the dryer cord plugged into a receptacle is an easy one to mess up that could be causing your problems, there are so many things wrong with dryers today.

If the dryer breaker is tripped, you can check the terminal block and wiring to make sure that everything is connected tightly. If you find any burned spots around the terminal or on its cord, call an electrician to fix it.

Check here for a solution for AF code.

Check the ground wire shield on the dryer cord to ensure it locks in the terminal. If you find that the dryer is not getting power check the fuse in the disconnect box. If there is no power, the breaker will be tripped and the dryer will not work.

4. Loose Wiring

If the dryer is not drying clothes properly, it might be because of a problem with the power cord. Try checking to see if the cord is plugged into an appropriate outlet and if there are any loose wires or damaged terminals on the block.

If your home wiring is good, then the problem could lie in the main control board.

Making sure that the dryer is off before attempting any repairs requires a little knowledge.

5. Control Panel Issue

If your dryer control panel is failing or not working properly, you may need to replace it. This guide will show you how to replace your panel.

The Whirlpool dryer control panel is a small, hidden panel that sits below the dryer’s main control panel. This panel contains all of the dryer’s features and controls, and can be difficult to access and replace.

This small, but important, component can be replaced by a qualified technician in just a few minutes. By doing this, you can restore dryer function and ensure optimal drying conditions.