Why Is My GE Top Load Washer Says Balancing [ANSWERED]

You may have noticed that your top load washing machine is making a balancing sound. This could be because the load is unbalanced. The “loading” function allows you to make room for a second load of laundry, and when the machine detects an imbalance, it’s only natural that it makes a noise. However, there are a few things you can try before contacting the manufacturer.

GE top-load washing machines use a balancing system to ensure the drum turns smoothly. But sometimes, you may hear a noise that sounds like a small grinding sound. This is an indication that your GE Top Load Washer is having trouble balancing itself and needs to be serviced.

GE Top Load Washer Says Balancing – Troubleshoot And Diagnosis

You’re loading your laundry, but the machine just won’t budge. What could be wrong? There are several possible issues that could be preventing your washer from completing a normal cycle.

Some are simple enough to fix yourself and others require a visit from the repairman. Let’s have a look at them.

1. Heavy items in the washer

This is a relatively common issue that can usually be resolved without too much trouble.

There are a few things you can try to get your washer balanced again. First, redistribute the load in the washer so that the heavier items are evenly distributed.

Then, run the washer on a shorter cycle or at a lower water level. Finally, if none of these solutions work, you may need to call a service technician to take a look at your machine.

2. Unbalanced load in the washer

This can be caused by several factors, such as too much laundry in the washer, unevenly distributed laundry, or bulky items that throw off the balance of the load.

If your GE top load washer is displaying the “Balancing” error code, there are a few things you can do to correct the issue. First, try redistributing the laundry in the washer so that it is evenly balanced.

If there is still an imbalance, you may need to remove some of the laundry from the washer. Finally, make sure not to overload the washer in future loads and keep an eye on bulky items to ensure they are evenly distributed.

3. Washing machine is not level 

If your GE top–loading washing machine displays the error code “balancing due to washing machine not level,” this means that the washer is not level and needs to be adjusted.

You can level the washing machine by following these steps:

1. Make sure that the washing machine is turned off and unplugged.
2. Place a level on the washing machine. The level should be placed on the floor, with the bubble in the level centered in the middle.
3. Adjust the legs of the washing machine until the bubble in the level is centered.
4. Once the washing machine is level, plug it back in and turn it on. The error code should no longer be displayed.

4. Something is blocking the washer from spinning properly.

There are a few things you can do to try to fix the issue. First, check to see if there is anything blocking the washer from spinning. This could be something as simple as a sock or a piece of clothing that got caught in the washer.

If there is something blocking the washer, remove it and see if the washer will spin properly. If the washer still will not spin, you may need to call a technician to come and take a look at the washer.

5. Faulty Speed Sensor

If your GE top load washer is displaying the error code “balancing” and you have verified that the washer is level, it is likely due to a faulty speed sensor. The speed sensor is located under the washer’s tub and is responsible for monitoring the speed of the washer’s drum.

If the speed sensor is not functioning properly, it will cause the washer to become unbalanced and will display the “balancing” error code.

To replace the speed sensor, you will need to access the washer’s control panel. Once you have access to the control panel, locate the speed sensor and unplug it from the washer. You can then replace the speed sensor with a new one and plug it back into the washer.

If you are not comfortable replacing the speed sensor yourself, you can always contact a GE appliance repair technician to do it for you.

6. Motor Pulley Issue

The function of the motor pulley in a GE washing machine is to keep the drum balanced during the spin cycle. If the drum is not balanced, it can cause the washing machine to vibrate and make noise. The motor pulley is located under the washer’s tub and is connected to the drive shaft.

The drive shaft turns the pulley, which in turn, rotates the drum.

The motor pulley is made of plastic and is subject to wear and tear over time. If the pulley becomes damaged, it will need to be replaced.

The motor pulley is responsible for turning the washer‘s drum. If it is damaged or not working properly, it can cause the washer to shake and vibrate excessively. This can lead to the error code being displayed.

If you suspect that your washer‘s motor pulley is the problem, the best course of action is to contact a qualified repair technician. They will be able to diagnose the problem and make the necessary repairs.

7. Broken Drive Belt

A drive belt is a type of belt that helps to keep various components in your car running smoothly. The engine’s crankshaft powers the belt, which then rotates the Pulleys. The drive belt essentially “drives” these various pulleys, which in turn operate components like the water pump, alternator, and power steering pump.

If your drive belt is frayed or worn, it can cause these components to malfunction.

check the drive belt to see if it is indeed broken. If it is, you will need to replace it. To do this, you will need to remove the old drive belt and then install the new one. Make sure that the new drive belt is tight and does not have any slack.

8. Rod & Spring Assemblies

When your GE top-load washer becomes unbalanced, it will automatically enter a balancing mode to redistribute the clothing load. This is done by the rod and spring assemblies inside the washer.

The rod and spring assemblies are located on the main tub near the bottom. There are four of them in total, two on each side of the tub. These assemblies help to keep the tub stable while it is spinning.

If one of these assemblies breaks, it can cause the washer to become unbalanced and enter into its balancing mode more often. You may also notice that your clothes are not getting as clean as they used to or that they are not getting dry all the way.

The Issue can be caused by a number of things, including a broken spring, a bent rod, or an imbalance in the washing machine itself.

If you’re experiencing this error code, there are a few things you can do to try to fix it. First, check to see if the springs are broken or the rod is bent. If so, you’ll need to replace them. You can also try to balance the washing machine by moving it slightly to one side or the other.

If neither of these fixes works, you may need to call a repairman to take a look at your washing machine. In most cases, balancing issues with GE top-load washers can be easily fixed by a professional.

Final Thoughts

In conclusion, if your GE top load washer says “balancing,” there are a few things you can do to fix the issue. First, try redistributing the laundry evenly in the washer. If that doesn’t work, you can try running a cycle with nothing in the washer to see if that balances it out.

Lastly, if none of those solutions work, you may need to call a professional to take a look at your washer.