Why Does My LG Dryer Say Cooling [ANSWERED]

When your LG dryer displays the message “Cooling,” it is telling you that the dryer is cooling down after a cycle. This is a normal part of the drying process and should not be a cause for concern.

The cooling process helps protect the dryer’s internal parts and prevents the dryer’s interior from becoming too hot. The cooling process begins at the end of the drying cycle, when the dryer shuts off and the drum stops spinning.

This allows the heat in the dryer to dissipate, cooling down the internal parts. As the dryer cools, the “Cooling“ message will be displayed. Once the internal temperature of the dryer is sufficiently cool, the message will switch to “Done” and the cycle is complete.

LG Dryer Say Cooling – Troubleshoot And Diagnosis

If your LG dryer is displaying the “Cooling” message, it could be due to a few different reasons.

The most common cause of this message is that the dryer has reached the end of the drying cycle and is in the cooling down phase.

In this case, the “Cooling” message is a normal part of the drying process and you can simply wait for the dryer to cool down before removing your clothes.

However, if your LG dryer is displaying the “Cooling” message and is not drying your clothes properly, it could be due to a few other potential issues. Some possible causes of this problem include:

• A clogged vent: The vent is responsible for removing hot air from the dryer and allowing it to cool down. If the vent is clogged, the hot air will have nowhere to go and the dryer will not be able to cool down properly. This can cause the “Cooling” message to be displayed and the clothes to remain damp.
• A faulty thermostat: The thermostat is responsible for controlling the temperature in the dryer and preventing it from overheating. If the thermostat is faulty, it may not be able to accurately control the temperature and the dryer will not be able to cool down properly. This can cause the “Cooling” message to be displayed and the clothes to remain damp.
• A faulty heating element: The heating element is responsible for generating heat in the dryer. If it is faulty, the dryer may not produce enough heat to dry the clothes properly. This can cause the “Cooling” message to be displayed and the clothes to remain damp.

If your LG dryer is displaying the “Cooling” message and is not drying your clothes properly, you will need to troubleshoot the issue to determine the cause. Here are some steps you can take to troubleshoot this problem:

1. Check the vent: First, unplug the dryer and locate the vent on the back of the dryer. The vent should be connected to the dryer with a flexible hose. If the hose is kinked or bent, this can restrict the flow of air and cause the dryer to not be able to cool down properly. To fix a kinked or bent vent hose, simply straighten it out and make sure it is securely attached to both the dryer and the wall vent. If the vent hose is damaged or worn, you will need to replace it with a new one.
2. Test the thermostat: To test the thermostat, you will need to use a multimeter. First, unplug the dryer and locate the thermostat. It is typically located near the heating element and may be covered by a piece of insulation. Once you have located the thermostat, set the multimeter to the “Ohms” setting and touch one of the probes to each of the terminals on the thermostat. If the reading is “OL” or “1” (depending on the type of multimeter you are using), the thermostat is faulty and will need to be replaced.
3. Test the heating element: To test the heating element, you will need to use a multimeter. First, unplug the dryer and locate the heating element. It is typically located near the back of the dryer and may be covered by a piece of insulation. Once you have located the heating element, set the multimeter to the “Ohms” setting and touch one of the probes to each of the terminals on the heating element. If the reading is “OL” or “1” (depending on the type of multimeter you are using), the heating element is faulty and will need to be replaced.