Frigidaire Dryer E68 Error Code [Quick Solution]

Frigidaire Dryer E68 Error Code is among the most common problems that Frigidaire dryer owners face. A user needs not to worry if the Frigidaire dryer stops working or refuses to start its cycle. The error codes like E68 can be solved easily without incurring huge repair costs.

Our walkthrough will demonstrate how to fix this problem on your Frigidaire dryer.

The Frigidaire dryer error code E68 is a problem with the control panel, causing buttons to get stuck or the panel to be faulty.

Modern dryers have advanced significantly to meet customer demands. They vary in size and can include a lot of extra abilities, like the capacity to display error codes — the same way OBDs work with your car.

Frigidaire dryers are designed to be hard working appliances, but they are not without occasional problems. Frigidaire dryer error codes can be difficult to decipher.

This guide will help you troubleshoot and fix common problems with the Frigidaire dryers. Since many of the error codes are similar, it should be easy for you to get the hang of the process even if you have no prior experience with dryer error codes.

In this article, we’ll walk you through how to troubleshoot a Frigidaire dryer with an E68 error code, and we’ll give you some other tips on dealing with a dysfunctional dryer that will come in handy when you’re searching for the cause of an E68.

Frigidaire Dryer E68 Error Code – Troubleshoot And Diagnosis

Frigidaire Dryer E68 Error Code

An E68 error means that there might be a problem with your dryer’s control panel. The source of the issue is usually one of two things: either the control board has malfunctioned, or the buttons have become stuck.

Enter the machine’s function test mode by plugging in your dryer and pressing “start” on the control panel. Examine each button separately to determine which one is at fault, then press that button and start your dryer again. If the fault code clears and stays clear, then you have fixed the issue. 

If that doesn’t work, you may need to replace the electronic control.

As we take a closer look at the issues at hand, we will be able to understand what they are, why they come about and how to resolve them.

1. Do A Reset

Sometimes all that’s needed to repair a broken appliance is a gentle reset.

If your dryer is displaying a code, the first thing you should do is reset the Frigidaire dryer and checking if that clears the error code. This may solve your problem with resetting your control board not being difficult because of its easy to use interface that most first time users can figure out on their own.

See also  Why Is My Frigidaire Dryer Squeaking [SOLVED] - Let's Fix It

Try the following: unplug your dryer, then hold down the power button for 30 seconds, and then plug it back in. You can also try turning off the breaker that controls the dryer in your breaker panel, wait ten seconds, then turn the breaker back on.

If the reset button isn’t on your model of dryer, you can manually manage your appliance. Press the Cancel/Pause button twice, and then hit Cycle Select until you find your desired cycle. Hit Start to resume drying and wait till it’s done.

If you get a flashing E68 code, press the Pause/Cancel button two times again while the dryer is still running. Then unplug the dryer from its power source for at least 10 minutes before reconnecting it.

2. Button Is Stuck

Button functions on a Frigidaire dryer may vary by model, but typically include start, stop, cycle selection, and temperature selection.

Dryer buttons are often placed where you can reach them easily, but if yours don’t work properly, it can be inconvenient. Badly placed or malfunctioning buttons can make your dryer even more frustrating to use than it already is – especially if other buttons are fine.

Sometimes, your dryer’s buttons can get stuck. If one of your dryer’s buttons gets caught, or sticks on its own, the dryer will give you an error code – E68.

Whenever your dryer shows an E68 error code, this means that one of the buttons has become stuck. The likelihood is that your push button came off or was left out. This can cause your dryer to display the error code and interrupt its normal operation.

The main cause of sticky buttons is simply a buildup of dirt and grime that seeps into between the button and its housing. Over time, dirt can accumulate on the mechanism that pulls the switch, causing it to stick or jam altogether.

Because the buttons on your control panel are subject to lots of wear and tear, they can become difficult to press over time. Dust, dirt, and oils from our environment enter even the tiniest crevices and ultimately make their way into our devices—eventually settling in between a control panel’s button and its housing.

The E68 code, as well as a few others, can be resolved by putting your dryer into its function test mode. This will allow you to manually test the buttons and fix anything that isn’t working properly.

To start your dryer’s function test mode, first locate the cycle selector knob. For dryers with a digital display, turn the knob to the “Normal” position. For those without a digital display, turn the knob to the 12 o’clock position. With the knob in the correct position, you can begin testing your dryer’s functions.

See also  Why Is My Dryer Not Spinning? [SOLVED] - Let's Fix It

Start by turning the knob to the right position. Then, hold down both the “Select” and “Pause/Cancel” buttons for six seconds. You’ll know the test mode is successful when you hear a buzzer sound or see the message “rES” on a dryer with a digital display.

To test the button, start by turning the cycle selector knob clockwise four times from its original position.

You should see the following things if your buttons are all working right:

When the Temp button is pressed, all of the Temp LEDs should light up.

After pressing the button labeled “Dryness,” all of the “Dryness” LEDs should light up.

All of the “Option” LEDs ought to turn on when you push the “Option” or “Select” button.

When you press the “Start” button, all of the cycle status LEDs should light up.

When the “Pause/Cancel” button is pressed, all of the cycle status LEDs should light up.

If one of these lights doesn’t illuminate, it means that the particular dryer button is stuck.

To exit dryer function test mode, press the “Select” and “Pause/Cancel” buttons at the same time for six seconds. Another way would be to unplug the dryer from the wall.

There are a few things that you can do in order to fix the sticky button in your dryer. You can try rocking it side-to-side and see if that helps.

If a button is sticking, try and pry it up with a sewing needle. If it sounds crazy but you’re sure in your gut that you can do it, go for it! A tiny bit of leverage could loosen the thing up, though I’d suggest wearing some rubber gloves just in case.

To fix a stuck button, use rubbing alcohol. Some people have had luck with hair dryers or cotton swabs, but all of these methods will only temporarily fix the issue. If your button is too far gone, you can always replace it, as button replacements are relatively inexpensive.

Rubbing alcohol is great for getting things unstuck — from windows that won’t budge, to dried-up electrical terminals, it’s always got a trick up its sleeve. All you have to do is soak a Q-tip in some rubbing alcohol, rub it around the edge of the button, and give it a “massage.

If all fails and If you still receive the “E68 error code” when attempting to use your dryer, it’s most likely that there is an issue with your control board.

See also  Why LG Dryer Reset Button Keeps Tripping [SOLVED]

Click Here for Frigidaire dryer AD code 

3. Defective Control Board

The control board on a dryer controls the operation of the dryer. It includes switches for the various functions of the dryer, as well as lights that indicate the status of the dryer. The board can control the temperature of the dryer, the speed of the dryer, and the amount of heat generated by the dryer.

There is no one definitive answer to this question, as the cause of a dryer control board failure may be a variety of things.

A common culprit is a faulty or corroded board, which can cause the dryer to stop working altogether.

In addition, a bad connection can also cause the board to fail, as can worn-out components. If you’re experiencing any problems with your dryer, it’s important to take it to a professional for diagnosis and repair.

Electrostatic discharge can cause malfunctioning in most electronic devices, and dryers are no exception.  Depending on the severity of this problem, it could be a minor obstacle that’s easily resolved.

Unfortunately, if it’s true that a Frigidaire dryer E68 error is caused by a faulty control board, there is no way to repair the problem or fix the defective parts yourselves. The only option is to buy a new one. Of course, replacing the whole control board isn’t too hard and can be done proficiently by professionals.

Here are the steps to replace control panel:

  1. Remove the upper cover by unscrewing the four screws that hold it in place.
  2. Remove the control board by unscrewing the six screws that hold it in place.
  3. If the control board has a ribbon cable attached, remove the cable by disconnecting it at the connector.
  4. Replace the control board by reinserting it into the dryer body in the same orientation as the original.
  5. Replace the screws that hold the control board in place.

If getting E64 error code, then please check this solution.

If you’re seeing the “Frigidaire dryer E68 error code” after powering on your dryer, it’s likely that something went wrong. If you’ve followed all of the steps in our guide, we recommend contacting a repair technician for help. Otherwise, keep following our instructions and hope for the best.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top