How To Unlock Whirlpool Washer [Step By Step Guide]

Whirlpool washer won’t unlock? Don’t worry, you’re not alone. This is a common problem that owners of Whirlpool washers face all the time. As with any electronic device, there can be specific reasons why your washer won’t unlock, so it’s important to identify the cause of the issue before trying to fix it.

Whirlpool is one of the best appliance brands in the world, and its washers are synonymous with functionality, durability, and efficiency. However, sometimes these washers start malfunctioning, and to recover the item back to its normal operation, it is good to know how to unlock the whirlpool washer.

How To Unlock Whirlpool Washer – Complete Guide

How To Unlock Whirlpool Washer

If you find that your Whirlpool washing machine is having trouble unlocking its door during the end of a cycle, it is likely that something has gone wrong with the automatic door-locking system or the relay board.

The typical fix for this problem is to press the “Lock” and “Start/Pause” buttons at the same time. Just make sure that you are holding down the correct buttons.

Disable The Control Lock

Does your Whirlpool washer keep locking? Control Lock feature may be enabled, which prevents the washer from starting accidentally. When the control lock is on you will see “LoC” or “LC” next to the time display. Examine your washer’s user manual for how to turn it off. If you cannot find a user manual, check Washer website for model-specific information.

Some Whirlpool washing machines feature a Control Lock (CL) feature on their control panel, located above the “POWER” button. The CL feature allows users to lock the washing machine’s control panel settings so that they cannot be changed while the machine is in use.

See also  5 Reasons Why Washing Machine Agitator Not Working - Let's Fix It

You can deactivate this feature by holding down one key. You can find the deactivation process in your user manual . Hold down the key for about two seconds, and you should see LoC disappear from the display.

Press The Start/Stop Button

The Whirlpool washer door can be opened by pressing the start/stop button, which is extremely convenient.

To lock and unlock the door, simply push the start/stop button to pause or unpause the washer and wait for a few seconds. Once you’ve waited long enough, the door will automatically unlock and you can go on your way.

Cancel The Load Cycle

The leading cause of why the Whirlpool washer would lock its door is because it’s on a load cycle. When the washer enters a load cycle, the door locks and it can’t be unlocked by any means once this happens.

There might be a problem with your Whirlpool washer if the load cycle is continued, and the door cannot be unlocked. First, press the cancel cycle button to un-freeze the control lock system. Then turn off the power to unlock the washer door.

If your whirlpool washing machine doesn’t have a control lock button, then you need to hit the power button and turn on the control lock in order to cancel the loading cycle.

Start A New Cycle

Another possible way of unlocking the Whirlpool Washer door could be stopping the previous cycle and starting the new one and for this purpose, you have to first power off the machine and drain out all the water inside it.

See also  GE Washer H20 Supply Error [Quick Solution]

Then, restart the loading cycle again, without having any items remaining on the inside of the washer. If the washer was not locked due to an item hanging down or anything like that.

Most washers will automatically drain the water when a power failure occurs. When you restart the cycle, engage the door lock three times.

Manually Unlock The Door

When you need to unlock the washer, you first have to unplug it. Use a T-20 Torx screwdriver to remove the three Torx screws around the bottom of your washer. Pull down on the bottom panel and pull it away from the washer.

Pull back up towards the top of your machine and find the release ring. Next, pull downwards on the release ring to unlock the door.

If you are always manually unlocking your washer door after each wash cycle, it’s possible that one of two parts has failed — the drain pump or the pressure switch.

How To Get A Whirlpool Washer To Unlock

Whirlpool’s washers are some of the most widely used units. They’re also some of the simplest to use and maintain. However, if you find that your set isn’t working as intended or has quit altogether, here is a guide on how to troubleshoot a Whirpool washing machine that will unlock the door.

To cancel your washing machine cycle, you have two options: hit the Cancel button , which will stop the wash cycle and unlock the door. The other option is to press and hold the Cancel button until the Whirlpool washer beeps at you twice. With this method, you’ll need to manually turn off the power; just don’t forget!

See also  Samsung Washer NF Error Code [FIXED] - KCSCFM Repair

How To Disable Lock On Whirlpool Washing Machine

Many of them are unaware of how to disable the lock on Whirlpool Washing Machine. For this problem, you can follow these steps.

When the error code appears, press the “Cancel/Del” button and then press “Start/Pause.”

However, if not working, then you should contact a technician and ask him what he wants to do after checking your machine.

How To Unlock Control Lock On Whirlpool Washer

In the world of Whirlpool washing machines, there are a variety of control lock settings to choose from. Here’s how to unlock your control lock setting.

To open the washer door when there are still minutes left in the cycle, press and hold the “Control Lock” button at the bottom of the control panel for 3 secs. When you hear 3 unlatching beeps, then your washer door is unlocked and you can open it.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top