Is your Samsung dryer not heating? If you have this problem with your dryer, you should know some tips that can help you. These are tips you can try to solve the problem yourself without calling a technician.
Going through this problem is very unpleasant for many people if it is summer or winter, a dryer is always essential at home. If you feel like your dryer is failing, there are specific steps you should take to verify where the problem may be coming from.
The Samsung dryer heating issue can be due to the blocked vent, worn-out wires, faulty heating element, or thermal cut out fuse. We suggest you check the clogged the air vent and heating element as they are the source of the problem in most cases.
The Samsung dryer has been in the market for over a decade now, which means that it should have gone through some ups and downs. But the truth is, there are still a lot of complaints from people who have used this product.
These can be categorized into two major categories; namely, the dryer’s not heating up the clothes and the ones of the dryer not giving a good drying effect.
| Dryer Problem | DIY Solution |
|---|---|
| Clogged Air Vent | Clean the vent lines and lint filters to ensure proper airflow |
| Overloading Issues | Avoid overloading the dryer and split large loads into smaller ones |
| Burnt Heating Element | Check the heating element for damage and replace if necessary |
| Blown Thermal Fuse | Test the thermal fuse with a multimeter and replace if faulty |
| Consulting with a Professional | If DIY solutions do not work, seek assistance from a professional |
Samsung dryer not heating clothes, or Samsung dryer not heating clothes well are two major complaints that you will find in Samsung products reviews. However, this is not an unfair criticism as many people would like to have their clothes dried as soon as possible, but other things can make it hard for them to achieve that.
How To Fix Samsung Dryer Not Heating Problem
When you see that the Samsung dryers run but will not dry clothes, you need to ensure that the vent lines and lint filters are not clogged, and the air can pass easily through it. It is a good practice to clean them and start the dryer again. In most cases, it will solve the heating issues.
Samsung Dryer runs but will not heat means that there is an issue with the heating element. Many times the heating element may get overheated and hence becomes faulty. This error mostly occurs in newer dryers. There can be many other problems such as clogged air vent, damaged fuse, faulty wiring, or incorrect voltage supply.
Clogged Dryer Vent
One of the most common reasons why a Samsung dryer not heating adequately is a blocked air vent.
The venting system of the Samsung dryer allows moist air from wet clothes to escape from the machine and to the outside. A clogged vent can cause heating issues.
Possible Cause: Due to long usage, many times, the vent may become clogged. Sometimes small particles may get stuck inside the lint filter and air vent, which will block airways’ passage.
Diagnostics: Although cleaning the lint filter after each drying cycle helps prevent clogging, dirt and debris can still get inside the air vent. In this case, the moist air cannot escape, and the clothes will remain wet, and the dryer will not dry clothes.
If you observe that the dryer drum is hot, you can safely say that it is due to a clogged vent. So to avoid these issues, we advise you to clean the dryer at least twice a year.
Overloading Issues
If your wet laundry accumulates near the top of the dryer drum, it means you are guilty of overloading.
After the max capacity is reached, the dryer’s heated air will not be able to circulate sufficiently, and the clothes may remain damp at the end of the cycle.
Diagnostics: You can refer to the user manual to know the correct capacity of the dryer. If you don’t have a user manual, we recommend that you only fill up to 75% of the Samsung dryer’s height. It will allow the hot air to circulate correctly inside the machine.
To speed up drying times, split large loads into two smaller ones. It will not only save time but also will increase the longevity of the dryer. It will also stop dryer smelling issues.
Burnt Heating Element
As we have already mentioned before, A faulty heating element can be why a Samsung dryer is not heating adequately.
The heating element’s primary function is to keep the dryer hot enough so that it can efficiently dry the clothes. But if due to some reason, the heating element is burnt out, then the dryer will run, but it will dry the clothes.
In an electric dryer, the metal coil creates heat, which will heat the air inside the electric coil. This hot air helps in drying the clothes.
The heating element may become faulty after years of use. There can be other causes also such as sudden power surge or lack of sufficient airflow inside the electric coil.
Factors that may speed up the heating element’s damaging process include overloaded dryers, improper cleaning of ventilation lines and lint filters, and poor ventilation.
Diagnostics: So it is important to avoid any further damage; you must clean the vent regularly and check the heating element regularly so that you can catch the fault before it becomes severe and hence avoid the Samsung Dryer not heating problem.
Please refer to the user manual for the exact location of the Samsung dryer heating element.
- Unplug the dryer.
- Check the heating element for any signs of damage.
- You can use a multimeter to test for continuity.
- If multimeter fails the continuity test, then it is better to replace it.
Blown Up Thermal Fuse
If reducing the load does not solve the issues, the problem may have to check the thermal fuse. It may be blown. So before we diagnose the issue, let’s see what this fuse does and why it is not working.
The thermal fuse of a dryer is a protective device that trips if the dryer is at risk of overheating. The fuse protects against power surge as well as when the dryer does not work properly.
Possible Cause: If the thermal fuse blows and the dryer does not overheat, the fuse may be malfunctioning.
Diagnostics: You need to check the thermal fuse with a multimeter and do a continuity test. If it fails the test, then the thermal fuse is faulty, and you should replace it. For doing this, you should do the below steps.
- To access the Thermal Fuse, remove the back panel.
- Locate the fuse. Usually, it is near the blower or the heating element.
- Use a multimeter and do a continuity test.
- If the fuse fails the test, then replace it.
If your Samsung dryer not heating up even after doing the above steps, it may be time to consult with a professional. They will help you with a quick and easy fix.
Above solution will work on below Samsung dryer model numbers: DV306BEW, DV306LEW, DV316BEC, DV316BEW, DV316HEC, DV316LES, DV316LEW, DV317AEG, DV317AES, DV317AEW, DV328AEG, DV328AER, DV328AEW, DV330AEB, DV338AEB, DV330AEW, DV331AER, DV331AEW, DV337AEG, DV337AEL, DV337AER, DV337AEW, DV338AEW, DV339AEG, DV339AEL, DV339AER, DV339AES, DV339AEW, DV340AEG, DV340AER, DV350AEG, DV350AEP, DV350AER, DV350AEW, DV393ETPARA, DV393ETPAWR, DV395ETPARA, DV395ETPAWR, DV3C6BEW, DV405ETPASU, DV405ETPAWR, DV407AEW, DV409AER, DV409AEW, DV409SEL, DV410AER, DV410AEW, DV419AES, DV419AEU, DV419AEW, DV428AEL, DV428AEW, DV431AEP, DV431AEW, DV438AEL, DV438AER, DV448AEE, DV448AEP, DV448AEW, DV456EWHDWR, DV484ETHASU, DV484ETHAWR, DV501AEW, DV5451AEP, DV5451AEW, DV5471AEP, DV5471AEW, BED70B, BED70W, DV203AES, DV203AEW, DV206AES, DV206LEW, DV209AEW, DV210AES, DV210AEW, DV218AEB, DV218AES, DV218AEW, DV219AEB, DV219AEW, DV220AEW, DV221AEG, DV221AES, DV229AEG, DV231AEW, DV2C6BEW, MDE6700AYW, MDE6700AZW, MDE9700AYM, MDE9700AYW, MDE9700AZM, MDE9700AZW, NED7200TW, YIED7200TW, and YNED7200TW.
Why Is My Samsung Dryer Not Getting Hot
If your Samsung dryer is not getting hot, it is typically caused by a burnt heating element. The failed component in question can be identified by the warning sign of a burning smell or uncharacteristic noises. Sometimes the source of these issues can be traced back to an improper power supply, so it’s important to check your dryer’s circuit breaker or fuse box.
Why Is My Samsung Dryer Running But Not Heating?
Samsung dryers are notorious for having problems with their electronics, meaning that the dryer may continue to run but only blow cold air. This is due to a variety of reasons, including a faulty door switch, which tells the dryer when to turn on or off; a faulty thermostat, which can switch off the heating element if it overheats; or a problem with the thermistor, which measures how hot the heating element is.
If your Samsung dryer will not heat, one of the first things you should check is the thermostat, which can prevent the machine from reaching a temperature sufficient for drying. A burnt heating element may also be responsible for your dryer’s lack of heat. If this is the case, you will need to replace it before your dryer can function properly.
Why Is My Samsung Dryer Not Drying My Clothes
Are you frustrated because your Samsung dryer isn’t drying your clothes? If so, you’ve come to the right place. Early washers and dryers were notorious for causing static in clothes and having poor lint-management systems. While those problems have been remedied, many newer machines still run into issues with drying properly.
When your Samsung dryer is acting up, it’s a good idea to check the heating element. A bad Samsung dryer heating element is a common cause of laundry problems, and in many cases can be easily fixed.
If your dryer is still not heating properly, the problem may be with the thermostat, thermal fuse, air vent line, voltage or other wiring issues.
Hi there! I’m Sam Hendricks, and I’m a repair technician and expert. I created this website to help people like you save money and time by fixing your own appliances.
Over the years, I’ve seen people spend a lot of money on unnecessary repairs or replacements. That’s why I decided to share my expertise and create easy-to-follow guides for fixing appliances on your own.