What do you do when your GE Ice maker Not Making Ice? Searching for a solution can be an inconvenience in itself. But there are a few common problems with GE freezers. We’re going to delve in and take a look at these major issues so you can find the solution.
The icemaker may have stopped working. A common problem with an icemaker going bad is a clogged water line, which causes a build up of ice. The GE icemaker has a filter that may need to be cleaned or replaced, a door switch that may be malfunctioning, or the temperature may not be set correctly. There are also more advanced problems, such as a faulty inlet valve, or a broken water line.
A broken appliance can feel like a disaster, but you don’t have to call in a service professional for every little thing. With these easy fixes, you’ll be on your way to ice and back to normal before you know it. It’s tough when we need ice and we don’t have it. Appliances break and the effects can be tough to swallow.
There might be a problem with your ice maker. To figure out what’s wrong and why GE Ice maker Not Making Ice, do some troubleshooting and testing.
1. Ice Maker Is OFF
If your GE refrigerator ice maker stopped working, the first step is to make sure the ice maker is turned on. The on/off switch should be a wire arm attached to the ice maker. If it is down, then the ice maker is on. If it is pushed up, then the ice maker is off.
If your ice maker is not working, there may be a few reasons why. If the ice maker is in the wrong position, it may not be able to make ice. It’s possible that the arm was bumped up when you were storing items in your freezer. Check to see if the arm is facing downward and clicked in place. If this is not the case, it may be under warranty and might need to be replaced.
2. Improper GE Freezer Temperature
If a GE ice maker isn’t making ice, it may be too warm. GE recommends that the freezer should be set to 0 to 5 degrees Fahrenheit for ice production. If it’s too hot, ice may not produce well or appear smaller or misshapen. On the other hand, if it’s too cold, ice may build up and frost will prevent ejection.
3. Ice Maker is Jammed
If your GE refrigerator ice maker is not working, it could be because of a particularly common issue. When a piece of ice doesn’t fall into the ice bin, a jam forms around the metal fingers of the ejector’s arm. The water from the melting ice freezes on the fingers, forming an ice bridge that blocks new cubes from being caught.
If your GE ice maker is not dumping ice, it’s usually because of a jam. To fix this, you can clear the ice from the ejector’s arm by using a plastic utensil. Do not use metal utensils, as they can damage the ice maker.
4. Faulty Water Filter
You should check to be sure that the water filter that you just replaced was installed and connected properly. If the refrigerator water filter was installed wrong, ice cubes will not form in the ice maker and can lead to other problems in the fridge.
A common problem is that the rubber seal at the top of the water filter is not seated correctly.
Your icemaker may have been clogged because your water filter has been installed in the refrigerator for too long. To fix this, simply remove and replace the old water filter with a new one. Once you’ve done this, give the refrigerator time to start making ice again.
5. Water Supply Line Issue
When your water line is not connected to your refrigerator, the water will not flow to the dispenser and you will not get any water or ice. The water shutoff valve on the refrigerator is closed- this prevents the water from coming into the door of the refrigerator.
GE refrigerators have a water valve that you must open before connecting the water supply line. Once the valve is open, turn on the tap and check for any leaks or air bubbles coming from the line.
The water should be running and the ice maker should be producing ice, but there’s nothing happening. Is the water line clear? There might be a kink or bend in it. Straighten it out if you find one, to avoid leaks. If the line is damaged, replace it to maintain your leak-free environment.
6. Icemaker Mold Thermostat
The icemaker module has a temperature sensor that automatically dispenses ice when the temperature reaches about 15 degrees Fahrenheit. There are all sorts of complicated components that make up the ice maker module. One of them is the ice ejector. It turns the drum to release ice when it’s time for a refill. Another important component is the water inlet valve. The water inlet valve is activated by the module when it sends power to it to start filling the drum again. With all these darn pieces, you should have an idea of just how intricate the ice maker module really is.
If you’ve got a defective icemaker module, don’t worry — we’ve got you covered. First, make sure your on/off switch is on and your bail arm is down. Then, if there are any ice cubes stuck inside the icemaker module, be sure to remove them. If your problem isn’t solved after using the tips above, call a technician.
7. Defective Door Switch
The water and ice dispenser in your fridge will turn off automatically when the door is open. To check if it’s working, just use a multimeter to measure the continuity on the door switch. If it doesn’t have continuity, then you’ll need to replace the switch.