Why GE Profile Ice Maker Blinking Green Light [ANSWERED]

If your GE Profile ice maker’s green light is blinking, it could be a sign that something is wrong with the unit.

In this article, we’ll explore some of the potential reasons why your ice maker’s green light might be blinking and what you can do about it.

GE Profile Ice Maker Blinking Green Light – Troubleshoot And Diagnosis

Let’s see some of the possible causes and fixes.

1. Harvest time greater than 30 minutes

When the GE Profile ice maker’s green light blinks, it is an indication that the harvest time is greater than 30 minutes. This can be caused by a number of factors, including a dirty water filter or a clogged water line.

If the green light is blinking, it is important to check these things and clear any obstructions so that the ice maker can function properly.

2. Stuck Rake

This is a relatively easy problem to fix. First, make sure that there is no ice build-up on the rake. If there is, use a hair dryer to melt it away. Next, check to see if the rake is properly aligned with the gear.

If it isn’t, realign it and see if that fixes the problem.

The rake is the part of the ice maker that scoops up the ice and dumps it into the storage bin. If the rake becomes stuck, it can cause the green light to blink.

To fix a stuck rake, first make sure that there is no ice blocking it. If there is, use a blunt object to break up the ice. Once the ice is clear, try moving the rake back and forth to see if it will loosen. If the rake still won’t move, you may need to replace it.

If not, you may need to replace the rake altogether.

3. Faulty Heater

Your GE Profile ice maker uses a heating element to help release the ice cubes from the mold. When this element fails, it can cause the green blinking light error.

To fix this, you’ll need to replace the ice maker. You can find replacement icemakers at most major home improvement stores or online retailers. Be sure to check your model number before ordering to ensure you get the correct one.

4. Defective Motor

The most common symptom of a faulty heater is that the motor does not operate and the rake does not stop rotating. To check if your motor is operating, first make sure that the power cord is plugged in and then press the reset button.

If the motor still does not operate, then you will need to replace the ice maker.

Final Thoughts

In conclusion, if your GE Profile ice maker’s green light is blinking, it could be due to a jam rake, bad motor, or faulty heater. To fix the problem, you’ll need to disassemble the ice maker and check each part for damage.

If you can’t find the source of the problem, you may need to replace the entire ice maker.