Why Is My Maytag Washer Stuck On Spin [Quick Solution]

We’ve all been there: A load of laundry starts in the washer, and then you get busy. You come back to the washer and find that it is still going and the clothes have been spinning for what seems like forever. It’s only a matter of time before that beautiful Maytag washer is going to break down on you.

One of the most common problems with Maytag washers is that they will get stuck in the spin cycle. This can be caused by a variety of issues, such as a load of clothes that didn’t get completely clean or too much soap being used during the wash cycle.

A solution for this problem is to turn off the washer and let it sit for a few hours.

Maytag Washer Stuck On Spin – Troubleshoot And Diagnosis

Maytag Washer Stuck On Spin

An issue you might run into with Maytag washers is that the cycle will not end. Here is how to deal with it.

1. Unbalanced Load

If your Maytag washing machine is stuck on spin, it may be due to an unbalanced load.

To fix this, simply redistribute the laundry in the wash basket so that it is evenly balanced.

There are a few things you can do to avoid this problem.

First, make sure that you evenly distribute the load in the washer. You don’t want to have too many heavy items on one side and too many light items on the other. Second, try to keep the load balanced as much as possible as it’s washing. This means avoiding big lumpy items that could shift and throw off the balance.

See also  Samsung Washer D5 Error Code [FIXED] - KCSCFM Repair

If you’re having trouble keeping your washer balanced, there are a few things you can do to help. First, try using a laundry ball or other similar device. These can help redistribute the load in the washer so that it’s more evenly balanced. Second, consider using a front-loading washer instead of a top-loading one.

You should also check that the washer’s legs are level and that nothing is blocking the washer’s door from opening. If these things are all in order, then your washer should operate normally.

2. Use the Right Detergent

It may be because you’re using too much detergent. Only use the required amount of detergent for your load size. Using too much detergent can create excessive suds, which can cause the washer to get stuck on spin.

If you’re using the correct amount of detergent and your washer is still getting stuck, try using a HE (high efficiency) detergent.

3. Lid Lock Problem

There’s nothing worse than starting a load of laundry only to have your washer get stuck on the spin cycle. If this happens to you, it’s likely due to a problem with the lid lock. Luckily, this is an easy problem to fix.

First, check to make sure that the lid lock is properly engaged. If it’s not, simply engage it and try starting your washer again. If the problem persists, you may need to replace the lid lock.

Replacing the lid lock is a fairly easy process. Simply remove the old one and install the new one in its place. Be sure to follow the instructions that come with your new lid lock carefully.

See also  4 Reasons Why Whirlpool Washer Leaking From Bottom – Let's Fix It

With just a little troubleshooting, you can have your washer up and running again in no time.

4. Reset The Washer

If your Maytag Washer Keeps Spinning, there are a few things you can try to reset the washer. First, unplug the washer from the power outlet. Next, open the door and remove any clothes or other items from the washer.

Finally, close the door and plug the washer back in to the power outlet. If these steps do not work, you may need to call a professional for help.

5. Malfunctioning Timer

A washing machine timer is a crucial part of the machine, as it controls how long the wash cycle runs for. Without a timer, your washing machine would simply keep running until you manually turned it off.

The timer on a washing machine is typically located on the control panel, and it can be set for different wash cycle lengths. For example, you may have a setting for a quick wash cycle that only runs for 30 minutes, or a longer cycle that runs for an hour or more.

The timer controls the washing cycle, and if it’s not working properly, the washer can get stuck on spin.

There are a few things you can try to fix for a malfunctioning timer. First, check the circuit breaker and reset it if necessary. Next, check the power cord to make sure it’s plugged in properly. Finally, check the connections between the timer and the washer to make sure they’re secure. If none of these things work, you may need to replace the timer.

See also  Washing Machine Drain Overflows By Wall Where Discharge Hose Goes In - Quick Fix

Final Thoughts

In conclusion, if your Maytag washer is stuck on spin, there are a few things you can do to try and fix the problem. First, check the washing machine’s door to make sure it is shut properly. If it is, then try unplugging the washer for 30 seconds and then plugging it back in.

If neither of these solutions works, then you may need to call a repairman.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top