7 Reasons Why Samsung Washer Not Spinning

Samsung washers are some of the most reliable and efficient appliances on the market, but even the best machines can have issues from time to time. If your Samsung washer isn’t spinning, there are several possible causes and solutions.

First, check for an overloaded washer. Your Samsung washer may not be able to spin if it is overloaded with clothes. Make sure to evenly distribute the load to ensure the best results. You may also have to reduce the amount of clothes that you are washing.

A common solution to try is resetting the washer to its default settings, which could potentially fix any issues that are preventing the washer from spinning correctly.

To reset your Samsung washer, you may need to locate a reset switch, which is typically located on the washer’s control panel. If you find it, hold it down for a few seconds until you hear a beep, indicating that the washer has been reset.

Alternatively, you could try turning off the Samsung washing machine and then turning it back on again. After that, select a new washing program and see if the issue is resolved.

In some cases, you may need to get a bit more hands-on to fix the problem. Cleaning the filter or drain hose can help to remove any blockages that may be preventing your Samsung washer from spinning.

You should also check for faulty suspension, worn out shock absorbers, door lock motor and switch assembly, loose drum nut, faulty drain pump, and broken plastic bracket. Finally, you may need to switch to a High Efficiency (HE) detergent.

With a little bit of troubleshooting and knowledge, you can easily fix your Samsung washer if it isn’t spinning. Taking the time to check for overloaded washers, resetting the washer, and cleaning filters can help to get your Samsung washer spinning again.

Causes of Samsung Washer Not Spinning

A washer can be a difficult tool to repair. They are hard to reach and expensive. This is why it is important to have a ground plan before starting your repair. Have a plan before you start troubleshooting your washer. Understand what the problems are. This will prevent you from spending more money. The first thing you need to do when your washing machine is not spinning is to determine its cause.

Over/Under Loaded

One of the most common reasons why a Samsung washer may not spin is due to it being over or under loaded.

Too much laundry can cause the washer to become unbalanced and this can cause the washer to become stuck and no longer spin. Similarly, if the washer is too light, it will not be able to spin.

To prevent this issue, it’s important to check the load size before starting the washer. If you have too much laundry, separate the load into two or more smaller loads and run them one after the other. This will help ensure that the washer is able to spin correctly.

You should also make sure that you are distributing the laundry evenly in the washer. This can help to prevent it from becoming unbalanced. It’s also important to avoid putting heavy items, like jeans or towels, in one corner of the washer. Doing this can also cause the washer to become unbalanced and it will not be able to spin. Additionally, if you are using a top-loading washer, you should avoid over-stuffing it, as this can also lead to the washer not spinning.

Finally, be sure to check the owner’s manual for the maximum load size for your specific model of Samsung washer. This will help you to ensure that you are not overloading the washer and that it is able to spin correctly. If you are still having trouble with the washer not spinning, it may be a good idea to contact a professional for help.

Reset Switch

If your Samsung washer is not spinning, one of the first steps you should take is to reset the switch. This is a simple process that can be done in just a few minutes.

First, unplug the washer from the wall outlet. Leave it unplugged for at least 10 minutes. Then, plug the washer back in and wait for the reset switch to respond.

If the reset switch does not respond, you may need to replace it. The reset switch is located inside the washer, usually near the bottom. You can access it by removing the back panel. Be sure to turn off the power to the washer before attempting to remove the panel. Once you have access to the reset switch, you can test it by pressing the reset button. If the washer still does not spin, the reset switch may need to be replaced.

Your Samsung washer also has a safety switch, which is designed to shut off the washer if it begins to overheat. To reset the safety switch, press and hold the reset button for several seconds. This should reset the safety switch and the washer should begin to spin.

If your Samsung washer is still not spinning after performing these steps, you may need to contact a repair technician. A technician can diagnose the issue and determine the best solution for your washer.

Faulty Suspension

Faulty suspension can be a major cause of a Samsung washer not spinning. If the suspension springs are worn out or damaged, the washer will not be able to spin correctly. The suspension springs are responsible for providing support to the inner tub and basket, and when they wear out, the inner tub and basket can become off balance and cause the washer to not spin.

If the suspension springs are worn or damaged, it is important to replace them as soon as possible. Be sure to use the correct type and size of springs for the model of Samsung washer. If the springs are not replaced, the tub and basket can become off balance and cause further damage to the washer.

To check the suspension springs, remove the back panel of the washer and inspect the suspension springs. If the springs are worn out or damaged, they should be replaced. Ensure that the new springs are the same size and type as the original suspension springs.

In addition to the suspension springs, check the shock absorbers as well. The shock absorbers help to reduce vibration and noise during the spin cycle. If the shock absorbers are worn or damaged, they should be replaced as well.

If the suspension springs and shock absorbers are in good condition, check the tub and basket for any damage or debris. Any debris that is found should be removed and the basket and tub should be adjusted to be level. This will help to ensure that the washer is spinning properly.

In conclusion, faulty suspension can be a major cause of a Samsung washer not spinning. Be sure to inspect the suspension springs, shock absorbers and the tub and basket for any damage or debris. If the suspension springs are worn or damaged, they should be replaced. The shock absorbers should also be inspected and replaced if necessary. Finally, be sure to adjust the tub and basket to ensure it is level in order to prevent further damage.

Worn Out Shock Absorber

One of the common causes of a Samsung washer not spinning is a worn out shock absorber. Shock absorbers play an important role in the proper functioning of a washing machine. They are responsible for controlling the amount of vibration and movement of the drum during the spin cycle. When the shock absorbers become worn out, the drum can vibrate too much, causing the spin cycle to slow down or even stop entirely.

In many cases, the main cause of the shock absorber wearing out is an imbalance in the load of laundry. If the load is heavily imbalanced, the shock absorbers will have to work harder to keep the drum balanced, leading to their wear and tear over time. In addition, if the shock absorbers are not replaced in a timely manner, they can become worn out due to normal wear and tear and age.

If you think that the shock absorbers may be the cause of your Samsung washer not spinning, it is important to replace them immediately. Replacing the shock absorbers is a relatively simple process that can be done in a few minutes. It is important to use the manufacturer’s recommended shock absorbers for your particular model of washer.

In addition, it is important to check the other components of the washer such as the drive belt, the motor, and the pulley system to make sure that they are all functioning properly. If any of these components are not in good working condition, they may be causing the washer to not spin properly.

In summary, a worn out shock absorber is one of the most common causes of a Samsung washer not spinning. It is important to replace the shock absorbers in a timely manner and to check the other components of the washer to make sure that they are all functioning properly. Doing so will help ensure that the washer is spinning properly and will help prevent any further damage.

Door Lock Motor and Switch Assembly

The door lock motor and switch assembly is responsible for locking the door of your Samsung washer when the machine is in use. If the door lock motor and switch assembly fails, the Samsung washer will not spin. This is because the machine cannot power on until the door is securely locked.

To test if the door lock motor and switch assembly is working properly, you can try manually locking and unlocking the door of the washer. If the door easily opens and closes, then the assembly is likely functioning normally. However, if the door does not lock or unlock, then the motor and switch assembly may need to be replaced.

It is important to note that the door lock motor and switch assembly is a crucial part of your Samsung washer. Without this part, the washer cannot operate. If the door lock motor and switch assembly is not functioning properly, it is important to replace it as soon as possible. Failure to do so could result in the machine not spinning, or worse, permanent damage to the washer.

Replacing the door lock motor and switch assembly can be a tricky and time-consuming process. If you are not comfortable doing the repair yourself, it is highly recommended that you seek the help of a qualified technician. They will be able to replace the assembly quickly and safely, ensuring that your Samsung washer is spinning again in no time.

Loose Drum Nut

When a Samsung washing machine is not spinning, it could be due to a loose drum nut. This is a common issue and can be caused by the drum nut being jarred loose from a sudden jolt or movement during a cycle.

The drum nut attaches the drum to the motor and when it is loose, the spinning motion of the drum is impeded.

The drum nut can be located by looking under the washing machine, near the back. It should be a round metal nut with a washer attached. If the drum nut is loose, it will need to be tightened. To do this, you will need to use a socket wrench and a socket that fits the nut. Once the nut is tight, you should be able to run the machine without further issues.

If you have a front-loading washer, the drum nut can be accessed by removing the front panel of the machine. After doing this, you will be able to access and tighten the nut. It is important to make sure that the nut is tightened securely and evenly. If the drum nut is too tight, it could cause the motor to be overworked and the machine may not work correctly.

If the drum nut is checked and tightened, but the machine is still not spinning, then the issue may be a more complex problem. If this is the case, it is recommended that you contact a professional service technician to ensure that the problem is correctly diagnosed and fixed.

Faulty Drain Pump

The most common cause of a Samsung washer won’t spin is a faulty drain pump. The drain pump helps to expel water from the washing machine during the spin cycle. If the drain pump is malfunctioning, it won’t be able to expel water properly and the washer won’t spin.

A faulty drain pump can be caused by a few different things. It could be due to a blockage in the drain hose, the pump itself might be damaged, or the motor may have burned out. If the motor has burned out, it will need to be replaced.

Another cause of the washer not spinning could be the belt. The belt is responsible for turning the drum in the spin cycle. If the belt is loose or broken, it won’t be able to turn the drum and the washing machine won’t spin.

It’s important to check all of these issues if your Samsung washer is not spinning. If the drain pump is malfunctioning, it’s important to replace it as soon as possible. If the belt is loose or broken, it should be replaced. If the motor has burned out, it should be replaced as well.

Once the cause of the problem is identified and fixed, the washer should be able to spin properly again. If you’re not sure what the problem is or how to fix it, it’s best to consult a professional.

Broken Plastic Bracket

One of the most common causes of a Samsung washer being unable to spin is a broken plastic bracket. This part, which is located at the rear of the washer, helps to keep the drum and the agitator in place.

If the bracket breaks, it can cause the washer to become unbalanced, which will prevent it from spinning. In some cases, it can also cause the washer to make loud noises, or to vibrate excessively.

If you suspect that the plastic bracket is broken, it is important to inspect the part carefully. If the bracket is cracked or damaged, it will need to be replaced. This can usually be done with a few basic tools, such as a screwdriver and a wrench. It is important to be careful when removing and replacing the bracket, as it can be fragile and easily broken.

Samsung offers replacement brackets for many of their washers. It is important to buy the correct part for your model, as not all brackets are interchangeable. In addition, it is important to make sure that the replacement bracket is securely fastened. If the bracket is not installed correctly, it can cause the washer to become unbalanced and prevent it from spinning.

If you are unsure how to install the replacement bracket, you can refer to the user manual that came with your washer. If you have lost the manual, you can usually find a copy online. It is also a good idea to check the manufacturer’s website for additional information or updates.

In most cases, replacing the broken plastic bracket will allow the washer to spin again. However, if the problem persists, it is important to contact a qualified technician for assistance.

Use of HE Detergent

Using the wrong type of detergent can cause problems with your Samsung washer’s ability to spin properly.

Samsung washers require the use of High Efficiency (HE) detergent. HE detergents are specially formulated to help reduce suds and conserve water. Regular detergents can create too many suds which can interfere with the spinning process.

If you are using a regular detergent, it is important to switch to an HE detergent to ensure that your washer is spinning correctly.

HE detergents are designed to work with the low-water washing cycles used by Samsung washers. They are low-sudsing, meaning that there are fewer suds in the wash water. This helps to prevent the washer from overfilling with suds, which can interfere with the spinning process. HE detergents also help to reduce the amount of water needed for washing. This is beneficial because it helps to conserve water while also ensuring that the washer is spinning correctly.

When using an HE detergent, it is important to use the correct amount. Too little detergent will not be effective in cleaning clothes, while too much detergent can lead to suds build-up. Refer to the manufacturer’s instructions for the recommended amount of detergent to use. Also, be sure to use only HE detergents in your Samsung washer. Regular detergents can cause problems with the spinning process and can damage the washer.

Taking the time to use the correct detergent for your Samsung washer can help to ensure that your washer is spinning correctly. If you are using a regular detergent, switch to an HE detergent to help prevent problems with the spinning process. Follow the instructions for the recommended amount of detergent and be sure to use only HE detergents in your washer. Doing so can help to ensure that your washer is spinning correctly and can help to conserve water.

Solutions for Samsung Washer Not Spinning

Let’s check them.

Over/Under Load Solution

If your Samsung washer is not spinning, it may be due to an over or under load.

An over load occurs when too much laundry is placed in the washer, causing the appliance to become overloaded and unable to spin. An under load occurs when too little laundry is placed in the washer, causing the appliance to become unbalanced and unable to spin.

To fix this, first check the load size you are attempting to wash.

Samsung washers have an optimal load size to ensure your clothes are washed efficiently. To determine the optimal load size, refer to your user manual or the Samsung website.

Once you have determined the optimal load size, adjust the laundry accordingly and try to spin again.

If the washer is still not spinning, the appliance may be unbalanced. To fix this, redistribute the load and try to spin again. If the washer is still unbalanced, you can try to manually redistribute the load by pushing down on the top of the washer and gently rocking it side-to-side. You can also try adding a few towels or other items to the load to help balance it out.

If the washer is still not spinning, the appliance may need to be serviced. Refer to your user manual for instructions on how to contact Samsung for repairs.

Reset Switch Solution

If your Samsung washer is not spinning, the reset switch may be the problem. This is a safety feature that can be used to reset the washer if it experiences a power outage or other problem.

To reset the switch, locate the switch on the back of the washer and press it. You may need to press and hold the switch for a few seconds before it will reset. Once the switch has been reset, you should be able to start the washer again.

If resetting the switch does not solve the problem, you should check the power supply to the washer. Make sure the power cord is securely connected to the outlet and that the outlet is providing power. If the power is on, you should check the wiring and circuit breaker to ensure that the power is flowing properly.

If the power is working properly, the next step is to check the drive belt. The drive belt is responsible for spinning the drum of the washer. If the belt is loose or broken, it can cause the washer to not spin. To check the belt, remove the back panel of the washer and inspect the belt. If it is loose or damaged, it will need to be replaced to restore the washer to working order.

If the drive belt appears to be in good condition, the problem may be with the motor. If the motor has failed, it will need to be replaced to get the washer spinning again. If the motor is working, the problem may be with the control board, which will also need to be replaced.

Resetting the switch is usually the first step in resolving a spinning issue with a Samsung washer. If the switch reset does not solve the problem, you will need to check the power supply, drive belt, and motor to identify and correct the issue.

Faulty Suspension Solution

One of the most common causes of a Samsung washer not spinning is a faulty suspension. If the washer’s suspension is weak or worn out, it can cause the washer to not spin correctly.

If this is the issue, you will need to replace the suspension. This can be done by a qualified technician, or you can try to do it yourself if you are comfortable with the repair.

When replacing the suspension, the first step is to remove the top panel of the washer and disconnect the power supply. Next, you will need to disconnect the wires from the drum and remove the drum from the washer. After that, you will need to remove the outer tub and the suspension assembly.

Once the suspension is removed, you will need to inspect it for any signs of damage or wear. If the suspension is damaged, it will need to be replaced. Once you have the new suspension installed, you will need to reassemble the washer in the reverse order of how you took it apart.

When installing the new suspension, make sure that it is securely attached to the washer and that it is properly aligned. You will also need to make sure that the suspension is adequately lubricated. Once everything is secure, you can reconnect the power supply and test out the washer.

If the washer is still not spinning, you may need to look at the other possible causes. But if the suspension was the issue, you should now have fixed the problem and your washer should be spinning properly.

Worn Out Shock Absorber Solution

The shock absorber in a Samsung washer is responsible for reducing the vibrations that occur during the washer’s spinning motion. When the shock absorber is worn out, the washer will be unable to spin properly.

To fix this issue, the worn out shock absorber must be replaced.

Replacing the shock absorber is not a difficult task, but it does require some knowledge of how to properly identify and replace the part. First, it is important to locate the shock absorber on the washer. This part is usually located near the bottom of the unit, attached to the base. Once the shock absorber is located, the next step is to remove it.

To do this, the user may need to unscrew some of the mounting bolts that are holding the shock absorber in place. It is important to keep track of which bolts were removed, as they will need to be re-attached when the new shock absorber is installed. Once the old shock absorber is removed, the user can then install the new one.

The new shock absorber will need to be attached using the same bolts that were removed earlier. Once the new shock absorber is in place, the user should be sure to securely tighten the bolts. After the new shock absorber is properly installed, the user can then run a test load of laundry to ensure that the washer is spinning properly.

If the washer is still not spinning properly, then the user may need to take the washer to a professional to be inspected further. There may be additional issues that need to be addressed in order to get the washer spinning properly again.

Door Lock Motor and Switch Assembly Solution

If your Samsung washer is not spinning, it could be due to a faulty door lock motor and switch assembly. The door lock motor and switch assembly is responsible for locking the washer’s door when the cycle starts, and unlocking the door when the cycle is finished. If the door lock motor and switch assembly is faulty, it may prevent the washer from spinning.

To check if the door lock motor and switch assembly is to blame, visualize the assembly and inspect it for any physical damage or corrosion. If the assembly looks damaged or corroded, it may need to be replaced.

If no physical damage is present, then the motor and switch assembly should be tested to determine if it’s working correctly.

To test the motor and switch assembly, first unplug the washer from the wall and remove the lid. Once the lid is removed, locate the motor and switch assembly. Disconnect the motor from the wiring harness and use a multimeter to check for continuity. If the multimeter does not indicate continuity, then the motor and switch assembly needs to be replaced.

Once the faulty component has been identified, the door lock motor and switch assembly should be replaced. To replace the assembly, first remove the screws and brackets that secure it to the washer. Once the screws and brackets have been removed, the old motor and switch assembly can be taken out and the new one installed. Be sure to reconnect the wiring harness to the new assembly and secure it with the screws and brackets. Once the new assembly is in place, the washer should be ready to use.

By replacing the faulty door lock motor and switch assembly, you should be able to get your Samsung washer spinning again. If the issue persists, it is likely due to another component or issue and further troubleshooting may be necessary.

Loose Drum Nut Solution

If your Samsung washer is not spinning, the issue may be caused by a loose drum nut.

The drum nut holds the pulley wheel and spin basket in place, and if it has become loose, it can cause the washer to not spin properly.

Fortunately, this problem is relatively easy to fix.

First, you’ll need to locate the drum nut. Depending on your model, it can be found in different places. Once you’ve located it, you’ll need to disconnect the washer from the power source and shut off the water supply. Then, you can remove the drum nut with a pair of pliers.

The next step is to examine the drum nut and any surrounding parts for wear and tear. If the nut is worn out, you’ll need to replace it with a new one. If the surrounding parts are worn out, you may need to replace them as well. Once you’ve replaced any worn out parts, you can reinstall the drum nut. Be sure to tighten it securely with the pliers.

Finally, reconnect the washer to the power source and turn on the water supply. Then, you can run a test cycle to make sure the washer is spinning properly. If the washer is still not spinning, you may need to check other parts.

Fixing a loose drum nut can be a simple and straightforward process. With the right tools and some patience, you can have your Samsung washer spinning again in no time.

Faulty Drain Pump Solution

If your Samsung washer is not spinning, the problem may be a faulty drain pump. The drain pump is responsible for draining the water from the washer after the wash cycle is complete. When the drain pump fails, it can cause the washer to stop spinning.

To check if the drain pump is faulty, you should first unplug the washer from the wall and remove the back panel. Then, you will need to check the drain pump motor, the hose connected to the drain pump, and the filter screen for blockages or debris. If any of the components are damaged, you will need to replace them.

It is important to note that the drain pump should be cleaned and checked regularly to ensure it is working properly. You should also check the wiring and hoses for any signs of wear or damage. If the wiring or hoses are damaged, they should be replaced immediately.

If the drain pump is not the issue, you should check the other components of the washer. This includes the timer, the drive belt, the motor, and the water inlet valve. If any of these components are damaged, they will need to be replaced.

Finally, if you cannot find the cause of the issue, you should contact a professional repair technician. They will be able to diagnose the problem and make the necessary repairs. With the help of a qualified technician, you can get your Samsung washer working again in no time.

Broken Plastic Bracket Solution

If your Samsung washer is not spinning, one possible cause could be a broken plastic bracket.

This bracket is responsible for suspending the agitator in the washer, and if it becomes broken or damaged, it can prevent the agitator from spinning properly.

To repair this issue, you will need to replace the plastic bracket.

The first step is to remove the washer’s agitator. To do this, you will need to remove the top part of the washer by lifting it up and away from the base. Once the top of the washer is removed, you will be able to access the agitator. Use a screwdriver to remove the screws holding the agitator in place, and then lift the agitator out of the washer.

Next, you will need to check the plastic bracket. Look for any cracks or breaks in the bracket, and check to see if any of the screws are loose. If any of the screws are loose, tighten them. If the bracket is cracked or broken, you will need to replace it.

Once you have replaced the plastic bracket, you will need to reassemble the washer. Start by putting the agitator back in place, and then reattach the top part of the washer. Make sure to secure all screws and tighten them so that the washer is secure.

Finally, test your washer to see if the issue has been resolved. If the washer is still not spinning, you may need to check other components to find the cause of the issue. However, if the washer is now spinning properly, your repair was successful.

Solution for Using HE Detergent

Using HE (high-efficiency) detergent in your Samsung washer can be a tricky task. If the washer is not spinning correctly, it could be an indication that the detergent is the problem.

To ensure that your washer is spinning correctly, follow these steps:

1. Check the label on the detergent container to make sure it is HE detergent. It should be marked with “HE” or “High-Efficiency.”

2. Measure the detergent carefully. Too much detergent can cause sudsing, which can lead to washer issues such as not spinning correctly. Stick to the recommended amount of detergent for the size of the load.

3. Select the correct cycle. HE detergent works best on the delicate cycle. If you select a cycle that is too hot or too aggressive, the detergent will not dissolve properly and could result in the washer not spinning correctly.

4. Check the filters. If the washer is not spinning correctly, it could be caused by a blocked filter. Check the filter for any lint or debris and clean it out if necessary.

5. Check the hoses. Make sure the water supply hoses are not kinked or blocked. Ensure the hoses are connected properly and the water is flowing freely.

Following these steps should help ensure that your Samsung washer is spinning correctly when using HE detergent. If the issue persists, contact a qualified technician for further assistance.

Conclusion

The Samsung Washer is a reliable appliance that can be fixed with simple troubleshooting steps.

If your Samsung washer is not spinning, it can be very frustrating. Fortunately, there are many potential solutions to this issue. The first step is to check the lid switch and make sure it is functioning properly.

If it is not, you may need to replace it. It is also important to check the belt for any signs of damage or wear. If it is worn or broken, it will need to be replaced.

Additionally, it is important to make sure that the motor is running properly and that the drain filter is clean. If any of these components is not functioning correctly, it can cause the washer to not spin.

Finally, it is important to check the timer and make sure it is advancing correctly. If it is not, you may need to replace it. Ultimately, if all else fails, it may be necessary to call a professional to diagnose and repair your Samsung washer.

Preventative Maintenance

Preventative maintenance is the best way to ensure your Samsung washer is running properly and spinning correctly. There are a few steps you can take to make sure your washer is in good working order.

First, check the manual that came with your washer for any specific instructions that may apply to your model. This will help you know the types of maintenance you should perform and when.

Next, regularly clean the filter on your washer. This helps to keep any lint or dirt from building up in the washer and potentially causing problems with the spin cycle.

You should also check the hoses and connections that direct water to and from the washer. Make sure there are no kinks or other issues that could prevent water from flowing properly.

Finally, it’s a good idea to periodically check the washer and look for any signs of wear and tear. If you notice any issues, repair or replace the part as soon as possible. This will help to keep your washer running smoothly and reduce the risk of future problems.

Following these preventative maintenance tips will help to ensure your Samsung washer is spinning correctly and running efficiently. Doing so can also prevent costly repairs in the future and help you get the most out of your washer.

Contact a Professional

If your Samsung washer is not spinning and you have attempted the troubleshooting steps listed above, you may need to contact a professional. If you have a warranty, you should contact the manufacturer to have a repair specialist dispatched to your home. If your warranty has expired, you can find a service technician online or in your local area.

When you contact a professional, be sure to provide them with the model and serial number of your washer. This information will help the technician to diagnose the issue quickly and accurately. You should also be prepared to discuss the symptoms you have noticed and any troubleshooting steps you have already taken.

Be sure to check the technician’s credentials to ensure that they are qualified to work on your Samsung washer. Ask for references and read reviews to ensure that they have a good reputation.

Finally, make sure that the technician is willing to provide you with an estimate of the cost of repair before they begin any work.