Why Is My GE Washer Start Button Flashing [SOLVED]

The GE Washer Start Button Flashing can be a daunting task for those unfamiliar with the process. It is important to know the proper steps to take when the button is flashing to ensure that it is working properly.

This guide will explain what to do when the start button is flashing and how to reset it. It will also provide troubleshooting tips and advice on how to prevent the issue from happening in the future. With this information, you should be able to get your GE Washer working again quickly and easily.

GE Washer Start Button Flashing – Troubleshoot And Diagnosis

It may be an indication that there is an issue with the washer. It could be something as simple as a power interruption or a more serious problem such as a faulty control board. In either case, troubleshooting steps must be taken to determine the source of the flashing start button.

GE Washer Start Button Flashing

When the start button on your GE washer is flashing, it means that the washer has detected an error and is unable to start the wash cycle. The exact cause of the problem will depend on the specific model of washer you have and the type of error that has been detected.

It‘s important to remember to always unplug the washer before attempting any troubleshooting. Once the source of the flashing start button is identified, it can be fixed or replaced to restore the washer back to proper functioning.

1. Overloaded Washer

If the start button on your General Electric (GE) washer is flashing, it could be due to an overloaded washer. 

If your GE washer’s start button is flashing and you suspect that the washer is overloaded, the first thing you should do is unload some of the clothes from the washer.

Washers have a specific capacity for the amount of clothes that can be washed at once, and exceeding this capacity can cause problems with the control panel or circuit board.

To unload some of the clothes from your GE washer, follow these steps:

  1. Press the “Stop/Reset” button on the control panel to cancel the current wash cycle.
  2. Open the washer door and carefully remove some of the clothes from the washer.
  3. Close the washer door and press the “Start/Pause” button to restart the wash cycle.

If unloading some of the clothes from the washer does not fix the problem and the start button is still flashing, there may be a problem with the control panel or circuit board. In this case, you will need to call a professional appliance repair technician for assistance.

2. Loose Wiring

Loose wiring can cause the control panel or circuit board to malfunction, resulting in the start button flashing.

The first thing you should do is unplug the washer from the power outlet. This will prevent any further damage to the washer and allow you to safely access the wiring.

Next, you will need to locate the wiring that connects the control panel to the circuit board. This wiring is typically located behind the control panel and can be accessed by removing the control panel from the washer.

Once you have located the wiring, carefully inspect it for any loose or damaged connections. If you find any loose connections, use a screwdriver to tighten them securely. If the wiring is damaged, you will need to replace it with new wiring.

3. Faulty Door Latch or Switch

When a door latch or switch is not functioning properly, it can cause the washer to malfunction, resulting in the start button flashing.

If You suspect that the problem is due to a faulty door latch or switch, the first thing you should do is unplug the washer from the power outlet. This will prevent any further damage to the washer and allow you to safely access the door latch or switch.

Next, locate the door latch or switch on your GE washer. This component is typically located on the front of the washer, near the door opening.

Once you have located the door latch or switch, carefully inspect it for any signs of damage or malfunction.

Some common signs of a faulty door latch or switch include:

  • A door that is difficult to open or close
  • A door that does not securely latch shut
  • A start button that flashes or does not respond when pressed

If you notice any of these symptoms, it is likely that the door latch or switch is faulty and will need to be replaced.

To replace a faulty door latch or switch on a GE washer, you will need to order a replacement part from an appliance parts store. The exact part you need will depend on the specific model of washer you have, so be sure to have the model number handy when ordering the replacement part.

Once you have the replacement door latch or switch, follow these steps to install it:

  1. Unplug the washer from the power outlet and lay it on its back to access the bottom of the washer.
  2. Locate the screws that secure the door latch or switch to the washer and remove them using a screwdriver.
  3. Carefully remove the faulty door latch or switch and discard it.
  4. Install the new door latch or switch by lining it up with the mounting holes and securing it with the screws you removed earlier.
  5. Plug the washer back in and test the door latch or switch to ensure it is functioning properly.

If you are not comfortable working with appliances or electrical components, or if you are unable to locate or replace the door latch or switch, it is recommended that you call a professional appliance repair technician for assistance.

4. Defective Timer

When a washer’s timer is defective, it can cause the control panel or circuit board to malfunction, resulting in the start button flashing.

ocate the timer on your GE washer. The timer is typically located behind the control panel and can be accessed by removing the control panel from the washer.

Once you have located the timer, carefully inspect it for any signs of damage or malfunction.

Some common symptoms of a defective timer include:

  • A washer that does not start or stop at the correct times
  • A washer that does not progress through the wash cycle as expected
  • A start button that flashes or does not respond when pressed

If you notice any of these symptoms, it is likely that the timer is defective and will need to be replaced.

To replace a defective timer on a GE washer, you will need to order a replacement timer from an appliance parts store. The exact timer you need will depend on the specific model of washer you have, so be sure to have the model number handy when ordering the replacement part.

Once you have the replacement timer, follow these steps to install it:

  1. Unplug the washer from the power outlet and lay it on its back to access the bottom of the washer.
  2. Locate the screws that secure the control panel to the washer and remove them using a screwdriver.
  3. Carefully remove the control panel and set it aside.
  4. Locate the timer and carefully unplug any wiring that is connected to it.
  5. Remove the defective timer and discard it.
  6. Install the new timer by lining it up with the mounting holes and securing it with the screws you removed earlier.
  7. Plug the wiring back into the timer and reattach the control panel to the washer.
  8. Plug the washer back in and test the timer to ensure it is functioning properly.

5. Do A Reset

To reset your GE washer if the start button is flashing, follow these steps:

  1. Press the “Stop/Reset” button on the control panel to cancel the current wash cycle.
  2. Unplug the washer from the power outlet and wait for at least 30 seconds.
  3. Plug the washer back in and press the “Start/Pause” button to restart the wash cycle.

If resetting the washer does not fix the problem and the start button is still flashing, there may be a deeper issue with the control panel or circuit board.

6. Water Supply Issue

If you suspect that the problem is due to a water supply issue, the first thing you should do is check the water supply hoses to ensure they are securely connected to the washer and the water supply valves.

Next, inspect the hoses for any signs of damage or kinks, which can restrict the flow of water to the washer. If the hoses are damaged or kinked, replace them with new hoses.

If the water supply hoses and valves are in good condition, the next step is to check the water inlet screens on the back of the washer. These screens can become clogged with debris over time, which can restrict the flow of water to the washer. Clean them to fix the issue.

7. Defective Sensor

A common problem with GE washers is when the start button begins to flash, indicating a defective sensor. To ensure your machine is working properly again, you need to identify the source of this issue and take corrective action immediately.

This flashing start button problem typically occurs when the water level pressure switch on the GE washer has a malfunctioning sensor or becomes clogged with debris. This causes an imbalance in the water levels within the machine, which trips the error code on display and makes the start button begin flashing.

In order to prevent further damage from occurring, it’s important to troubleshoot this issue as soon as possible by checking for any blockage that may be present inside of your GE washer.

8. Replace The Start Button

It may be necessary to replace the start button in order to restore your machine to its full working capacity.

There are a few steps you will need to take when replacing the GE washer’s start button. First, you should unplug the power cord from the wall outlet before attempting any repairs or maintenance on your machine.

After doing this, you will need to access the control panel located at the top of the unit where you can locate and remove all screws securing it in place. Once the panel is free, you can remove the wires from the start button, remove the old button and replace with a new one.

Conclusion

In conclusion, a flashing start button on a GE washer can be caused by a variety of issues, including an overloaded washer, loose wiring, a faulty door latch or switch, a defective timer, a problem with the water supply, or a defective sensor.

To fix this problem, you can try resetting the washer by pressing the “Stop/Reset” button, unloading some of the clothes from the washer, or cleaning the water inlet screens. If the problem persists, it is recommended that you call a professional appliance repair technician for assistance. A technician will be able to diagnose the problem and provide the necessary repairs to get your washer working properly again.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top