LG Washer OE Error Code [FIXED] – Causes and Solution

The LG Washer OE error code is an indication that the washer is unable to drain the water it used during the wash cycle. LG manufactures a wide range of washing machines, and they are known for their reliability and efficiency. 

That being said, LG washing machines can also experience some problems with drainage issues. This article will help you diagnose and fix the LG Washer OE code so that your washer is back in business.

How To Fix LG Washer OE Error Code

LG Washer OE Error Code

The “OE” error on your LG washer’s display is causing it to buzz and not operate at all? It could be a serious problem, but it could also be a minor issue or just a simple fix.

LG Washer OE error code indicates that the washer is unable to drain the water it used during the wash cycle. One cause of this issue is a kinked drain hose, while another common cause is a clogged drain pump filter.

One of the common issues with LG washing machines is the OE error, which you may encounter during a wash cycle. The appliance will stop working, the water will be left in the tank, and the display will show the OE code.

It’s very inconvenient: you have to drain the tank, start over from scratch, and potentially lose your progress.

A washing machine is one of the most helpful appliances in a household. A washing machine can save you hours, days, even weeks in time over the course of its lifetime. However, it can be frustrating when a fault occurs.

Fortunately, some of these faults can be detected and fixed quickly and easily on your own using the help of an error code reader. If your washing machine is not working as well as it used to, we’re here to help.

1. Unbalanced Load

One of the reasons that your LG washer is displaying OE code is due to an unbalanced load. When you wash a large or heavy item, it can settle on one side of the drum. 

This can cause the machine to go out of balance, and water may remain in the drum. To avoid this, try throwing a few lighter items in with a heavier one so that the drum isn’t as unbalanced.

See also  How To Empty A Washing Machine Full Of Water - Step-By-Step Instruction

2. Using the Wrong Detergent

If you have an HE LG washerdon’t use a non-HE detergent or more than the recommended amount of HE detergent. Non-HE detergents create too many suds for an HE machine to drain properly, which can result in your washing machine getting stuck in mid-cycle. Because of this, your clothes won’t get clean, and you may end up having to run the entire cycle multiple times.

To get the best results from your LG washer, use recommended detergent and read the instructions that come with it carefully.

3. Clogged or Kinked Drain Hose

To check if your LG washing machine’s drain hose is causing issues, simply remove it from the back of the washer and see if it has any kinks or bends. If you notice that the hose is crimped or curved in a way that prevents water from flowing through it properly, you can easily straighten it out.

Whenever a washing machine is not draining properly, first check that the drain hose is clear and that there are no clogs causing the problems. If you find a clog or obstruction in the drain hose itself, cut power to the washing machine by flipping the breaker switch in your home’s main panel box or shutting off the circuit breaker. Make sure you have a bucket handy to catch the excess water that drains from the drain hose.

Follow the steps below to clear the OE code

  1. Disconnect the drain hose from the rear of the washer.
  2. Use a bucket to collect any remaining water and contents.
  3. Remove any blockages in the drain hose using a snake or other flexible tube.
  4. Reconnect the drain hose to the rear of the washer and turn on the water source and power switch.

4. Clogged Drain Pump Filter

The drain pump filter may be clogged. Before you can clean the drain pump, you need to open the access panel. Luckily, it’s located right on the bottom of the machine in front of the filter housing.

See also  6 Common Speed Queen Washer Problems and Solutions - Let's Fix It

After you remove the two screws that hold it in place, lift the cover-up and set it aside. The pump will be located on the front of the washer. There will also be a retractable drain hose nestled beside it.

Run water from the faucet and make sure to place a towel to prevent water damage. Remove the cap and clean the filter using a soft brush or by running it underwater. Make sure to replace the hose and cap before putting back the filter and cover.

5. Check the Drain Pump

Run a cycle with only the drain pump. If the machine runs smoothly and the error code doesn’t appear, there is an obstruction within the pump itself that might need to be cleared. This will help in resolving the LG washer OE error code.

If no humming sound is heard, it’s likely that the drain pump is faulty and will need to be replaced.

6. Faulty Door Lock and Switch Assembly

There’s a little door lock and switch assembly inside your LG washer. When you close the washer door, this mechanism signals to the machine that everything’s good to go. There are two common causes of failure here: 

  1. The lock or switch can be broken.
  2. The wires connecting the lock or switch to the control board can be loose.

If your washer’s door lock does not allow you to open or close the door, it is because the door switch and lock assembly have broken. It is always best to replace this assembly, as attempting to fix it may cause further damage.

How To Fix LG Washing Machine OE Error

The LG washer error code OE is one of the most common issues that can happen with the washer. This error code is displayed when there is a fault in the programming or the system hardware. It can cause the washer to not power on, drain water and spin, or stop mid-cycle.

LG washer control boards are occasionally affected by glitches that can be resolved by resetting the board. In this case, the solution is simple: just turn off the washer, wait five minutes, and then turn it back on. If this reset has no effect, though, then a more serious issue is likely to blame — in which case you’ll need to find the problem and resolve it.

See also  Samsung Washer Error Code SE or 5E - Troubleshooting and Diagnosis

LG Top Load Washer OE Error Code Fix

LG has been a well-known brand in the appliance market for many years. The company always strives to improve its customer service in order to build positive relationships with its valued customers. With this, LG created a reliable and efficient washing machine that can help you wash your clothes with ease.

If your LG top loading washer is giving you an OE error code, there are a few things you can do to fix it. Check your water supply and make sure that it’s at the correct level. If you’re using a water softener, check to make sure that it’s not set to bypass.

LG washing machine error code OE is a problem with your washer that means it’s unable to drain out the water while in a wash cycle. This could be due to a clogged drain pump filter or the drain hose being kinked.

LG Washer OE Error Code Repair Front Load

LG, like many other brands, is not immune to product errors. Though the company creates high-quality products and includes manuals with information on how to troubleshoot them, sometimes even the best washer will give you trouble.

LG Washer OE Error Code is typically caused by a malfunction of the pressure switch, failure of the pump or blockage in the drainage system. Test both the machine’s electrical functions and its drainage system to pinpoint the exact cause of your problem.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top