Samsung Washer DC Error Code [FIXED] – KCSCFM Repair

Samsung Washer DC Error Code indicates an unbalanced load and Samsung Washer will not spin the clothes around as it should. This can be fixed by removing some of the clothes from the Samsung washer or redistributing them evenly throughout the Samsung washer.

Samsung offers a wide range of washers for residential applications, ranging from top-loaders to front-loaders and even high-efficiency models.

Samsung Washer has a built-in balance sensor that detects if you have an unbalanced load, but sometimes the DC code can be triggered by something other than an uneven load.

This code is usually displayed on Samsung front/top load washers during a spin cycle (before or after) or during any other washing mode if overloaded clothes interfere with clothes movement inside the drum.

Below are steps on how you can troubleshoot Samsung Washer DC Error Code so your clothes get clean

What Does The Samsung Washer DC Error Code Mean?

Samsung Washer DC Error Code

When you get the dreaded DC code error message on your Samsung washing machine, you immediately want to know how to fix it. The error is displayed during a load of laundry: the drum won’t spin, and sometimes it makes a beeping noise. Luckily, The solution is simple.

DC errors are essentially caused by a load imbalance or excess weight in the washer. This usually happens when there’s an imbalance in the load inside and one of the washer’s shock absorbers needs repair. To continue using your washing machine, you should redistribute weight to the opposite side to balance out the load.

You can try a few steps to troubleshoot your washer before you call for help. Start with resetting the machine. Unplug the washer from the socket. Leave it unplugged for 15 minutes, and then plug it back in. Restart the washer, and see if the error pops up again.

If it doesn’t fix the issue, then read on for more troubleshooting tips.

How To Fix Samsung Washer DC Error Code

When you’re washing clothes on your Samsung washer, this error code will appear in the front panel display, accompanied by a series of beeping. These malfunctions may be caused by the following:

Balance The Load

If you’re getting a “DC” error code, try redistributing items in your washing machine. If you have a top-loading washer, then Bulky items like bed sheets, comforters, and towels should be loaded on the bottom of the machine. Jeans, sweaters, and jackets should go in the middle rack, and lightweight items such as undergarments, socks, and towels should be placed at the top of the machine.

Your washer may be having trouble when it comes to balancing your loads. The most common causes of unbalanced loads are bulky items, such as bedsheets, comforters, and towels. Jeans, sweaters, and jackets also cause imbalance due to the weight and the irregular shape of the pockets. Oversized loads will not give good washing results.

If you get a DC code error on one of your loads, try these steps. First, check the load for any items weighing more than 15 pounds. If you see anything like that, move it to another load or separate it so that it’s evenly distributed with the rest of your laundry. Similarly, if you see any items that are particularly bulky or stiff — think towels — try spreading them out over the barrel and evenly distributing their weight.

Be sure to keep large or bulky items away from the spin barrel in your Samsung washer — it’s actually very easy to get tangled around the spinning machinery, and this could cause a DC error code.

Moving your clothes around when you wash them can help prevent them from becoming twisted up in the washing machine. Make sure you’re not overstuffing the machine or putting too many heavy items in one load — both of these things will cause the machine’s motor to strain as it works to keep your clothing spinning.

If you’re washing a large load of clothes that are heavy, try redistributing the load around the spin barrel. If that doesn’t work, try unloading some of the items. If they’re still too heavy for your machine, remove a couple more things. If your load is not very heavy and you’re able to fit all the clothes into your washer, make sure you don’t overload it.

Samsung washers are known for their large capacities — you can wash up to 8 kg/17.6 lbs of laundry at a time. Yet, even though the washer has plenty of space to fit your favorite set of clothes, you might run into the issue of overloading your washing machine.

When washing a single item or a small number of items, the centrifugal force of the spinning motion can cause them to stick together. This is known as “balling up.” If this happens, a Samsung Washer DC error code will appear on your washer’s display panel.

To resolve this error, add a towel. This will help ensure that the clothes are evenly distributed throughout the load.

Level The Samsung Washer

In most cases, weight redistribution will correct the problem; however, if the issue persists after trying this method, make sure to check whether the Samsung washing machine is level in both directions.

If you’re still not sure whether or not your washing machine is level, the first step is to set a glass of water onto the machine and observe whether or not the water sits level. If the water sits crooked and rocks slightly, the washer also leans to one side, causing the Samsung Washer DC Error Code

Before you get started, check whether or not your washer is level. If it isn’t, adjust the legs accordingly. Your washing machine may not drain if it remains tilted at more than a 15-degree angle. 

If you are unable to keep your washer level, try moving it closer to a wall or other solid structure. You may also try securing the washing machine with a washing machine jack.

If your washing machine doesn’t balance on an uneven surface, there are a few options. One is to try to adjust the leveling pegs in the legs of the washing machine

The corner peg will be the easiest one to adjust, as it is directly connected to the leg and is easy to access. You should see a little hole in that corner where you can insert a hex wrench to rotate the peg clockwise or counterclockwise to raise or lower it.

Worn Out Suspension Rods

When a “DC” error code pops up on your washing machine’s display, it’s important to find out what exactly has gone wrong. Often, the problem is not with your washing machine itself but rather with its suspension rods.

These rods work to hold the washing machine in place while it’s spinning and shaking vigorously during a cycle — if they’re damaged or bent out of shape, they’ll prevent the appliance from working correctly.

If the washer is vibrating, it is most likely due to broken suspension rods. Before calling a repairman, visually inspect the rods for damage. If a rod is visibly bent or does not return completely to its original position, it should be replaced.

Conclusion

If you have Samsung Washer DC Error Code, try adjusting the number of clothes in your load or unloading some items. Make sure to check that the Samsung washing machine is level and replace any broken suspension rods if necessary. If these tips don’t help, call a repairman for assistance.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top