Sharp TV won’t turn on? Sounds like a common problem. Luckily, there’s a simple fix – and this troubleshooting guide will walk you through it. Let’s go over the different possible issues, and then move to a quick solution for each one.
The Sharp TV is a very famous and economical TV and known for its picture quality. But if the television doesn’t turn on at all, then it is a matter of concern.
If you’re having trouble with your Sharp TV, there are a few things that you can check without calling customer service. Double-check that the power cord is plugged in and the TV itself has power; if you’re using a cable box or satellite receiver, make sure it’s turned on as well. Check for adequate ventilation around the TV to ensure that heat isn’t building up in the back of the unit.
Sharp TV Won’t Turn ON – Troubleshoot and Diagnosis
When your TV refuses to turn on, it can be a hassle. While there are many possible reasons and fixes, they need to be approached differently, depending on the issue. If your TV isn’t turning on, try these step-by-step solutions and troubleshooting tips.
Ensure that Sharp TV is getting Power
If your television’s power is turned off or the TV is unplugged, the LED light will not blink at all. If the LED light does not flash when the TV is powered on, there is an issue with your TV’s power supply. The first thing to try is plugging in a different device to make sure you don’t have a power issue. If that doesn’t work, there may be an issue with your wall outlet.
Here are some steps to make sure your television is getting the power supply it needs:
- Check both ends of the cable. If you’re using an extension cord, make sure it’s functioning properly and that you’ve gotten a strong connection for the plug. If you’re still having issues, try plugging directly into the wall socket.
- If your television doesn’t turn on, there may be something wrong with the power cord. Try plugging it in another outlet.
- If the LED light still does not turn on, the problem may be with your power cord or the cable itself. You can try replacing them. If the TV still does not turn on, you may need a new power supply.
Issue with TV Remote Batteries
If the LED indicator light blinks on your TV, it means the remote’s battery is low and requires replacement. Replacing the battery should solve the issue. If replacing the battery does not work, the remote’s internal receiver may need to be replaced.
We’ve all been there — your remote stops working and you’ve got no idea how to fix the problem. When it comes to the world of electronics, they don’t always play nice with each other, which means that you have to do a little detective work in order to identify what is causing the issue.
If your remote control isn’t working, try replacing the batteries. Remove the battery cover and place a new pair of AAA batteries into the remote. Now press any button to turn on the TV and try out your remote. If this doesn’t solve your problem, check if you can find any lost or stuck buttons on your remote.
If the Sharp TV won’t turn on, this could mean that the remote control is defective. To troubleshoot the remote control, check for any damage to the IR sensor and ensure there is no object blocking it from sending a signal.
Check the sleep timer
Many people use this mode when watching TV at night so that you can go to sleep peacefully without being disturbed by the background noise. However, this is not a suitable setting for some programs. If the TV keeps turning off during playback, check to see whether the sleep timer is turned on. Please check if the Sleep Timer is set to on. If the Sleep Timer is turned on, please turn it off by following the steps below:
- Press Menu on your remote control.
- Press the left or right arrow keys to highlight Settings.
- Press Enter.
- Highlight Time Setup and press enter.
- Select Sleep Timer and press enter.
- If it is on, turn it off.
Reset Internal Power Supply
If your TV isn’t turning on, check the power source first. If you’re using a plug-in style power adapter, be sure it’s connected firmly to the wall outlet. Make sure there are no visible cracks in the adapter or loose connections. If it’s possible, test with another TV that you know works.
Check to make sure the power outlet you’re using is working by plugging in another device, like a lamp. If no other devices are working in the outlet, it can be due to an electrical problem in your house and should be reported.
Power issues are some of the most common problems that many users face. Typically, the problem is caused by the power supply, which may malfunction and be unable to provide a steady flow of energy to the TV unit. Here is how you can fix your Tv if it’s not responding or powering on:
- Disconnect the power cord from the wall outlet.
- Remove all the connected wires of the television.
- Wait for twenty seconds.
- Connect all the cords and wires again.
In this way, it will be possible to see a clear picture on your television set without any issues.
Sometimes your TV won’t turn on. This can be caused by a few reasons, but the issue occurs due to low power. To fix this, you need to make sure you have enough power in your area. This can be done through using a UPS (Uninterruptible Power Supply), which helps to balance the power across your areas.
Sharp Aquos TV Won’t Turn ON
Should your Sharp Aquos TV not be performing as expected, there are plenty of ways you can troubleshoot the issue. Have a look at this list of potential solutions to fix your screen problem:
Check that the TV has power by looking for a light or other indicator near the plug at the wall outlet Connect all cables to and from the TV correctly – look for a sticker or icon on each cable that shows what device it belongs to.
Make sure your TV is receiving power, that it has proper ventilation, that the remote is operational, that all cables and wires are connected properly, and ensure your devices settings are correct if running into trouble.
Sharp TV Won’t Turn ON Power Light Blinks
If you see a blinking yellow light on your Sharp TV, then it’s quite likely that the TV is “blinking.” If this happens to you, there are several possible causes of the problem. The first thing you should do is check whether it is flashing because you pressed some button on the remote or if it’s a more serious issue.
If you’re having trouble with your TV, the first thing you can do is to press the power button on the remote or at the back of your TV for five seconds. This will discharge any static electricity that may be in the device, and it could get your TV working again.
If that doesn’t work, then you should carry out a hard reset. This process will remove any settings you’ve made and revert your TV to factory settings.
Hi there! I’m Sam Hendricks, and I’m a repair technician and expert. I created this website to help people like you save money and time by fixing your own appliances.
Over the years, I’ve seen people spend a lot of money on unnecessary repairs or replacements. That’s why I decided to share my expertise and create easy-to-follow guides for fixing appliances on your own.