5 Reasons Why Sharp TV Remote Not Working [SOLVED] – Let’s Fix It

Sometimes remotes stop working because there’s nothing wrong with them. This can be frustrating, especially when you are a busy individual who doesn’t have time to troubleshoot simple problems. Nevertheless, it is worth taking the time to do so with a Sharp remote, because the problem may be something very simple that you can fix in minutes.

Life without remote control is a nightmare, especially when your remote control stops working. You can’t switch on your favorite TV show, you can’t surf channels, and you can’t even watch any program that you like on the small screen. As a result, it consumes your precious time as well. However, you can fix TV remote control by yourself instead of calling a technician.

Sharp TV Remote Not Working – Troubleshoot and Diagnosis

When you lose the ability to control your television, it can be frustrating. But it shouldn’t take much time or effort to get things back in working order. Here are a few simple troubleshooting tips to try if your remote control stops working correctly.

Sharp TV Remote Not Working

Change the Batteries

Remote controls are only as functional as their battery supply — after all, if the TV won’t turn on, there’s very little point in even trying to repair it. Before you start any repairs, check those batteries! Remote control batteries often go unnoticed until they die completely — and then the remote becomes a frustrating waste of space.

Don’t waste money on unnecessary repairs: first, check the batteries. If they’re low, your remote control won’t be able to pair with your Sharp TV.

To troubleshoot remote control issues, we recommend replacing the batteries with brand-new ones. To do so, turn on your power strip (if you have one), unplug your TV from it and plug it directly into the wall socket. Next, remove the back of your remote and insert 2 new AAA batteries. Finally, try using your remote control again to see if that resolves the issue.

See also  7 Reasons Why Vizio TV Won't Turn ON - Let's Fix It

Place your batteries correctly. Don’t mix up the positive and negative ends, connect them both to the same end of the battery compartment, or connect opposing ends of the batteries together. Using the batteries incorrectly can damage them and your remote control.

Make Sure the Remote Control Sensor on your Sharp TV is Unobstructed

If you have a Sharp TV, there’s a high chance that you already know this, but just in case: if your TV is on the longer side and it has anything in front of it — like a cabinet or furniture — you might need to remove that object before you get your remote control to work.

Although it may be invisible to you, your TV has infrared sensors — tiny spy cameras that record every time you use your remote. So, if there’s a physical obstacle between you and the sensor, the TV may not respond to your request.

On some Sharp TVs, the sensor is located at the bottom of the TV in the center under the screen. Nothing should be lying on top of it. If your remote isn’t working, check for objects that could be hindering this sensor and move them. You may want to position your remote control so that it’s within direct line of sight from your seat.

If your TV consistently fails to respond to the remote, there may be a piece of dust or dirt in the sensor. Run a soft and lint-free cloth over the sensor window to wipe it clean. Avoid using liquids and sprays on your device as they could damage the sensitive hardware or electronics inside.

See also  Why Is My Vizio TV HDMI Not Working [SOLVED]

If your TV consistently fails to respond to the remote, there may be a piece of dust or dirt in the sensor. Run a soft and lint-free cloth over the sensor window to wipe it clean. Avoid using liquids and sprays on your device as they could damage the sensitive hardware or electronics inside.

Reduce Distance Between TV and Remote

The maximum effective range of a Sharp TV is ten meters or thirty feet — this means that you can’t use your remote to control your set from across the room, but it’s ideal if you’re right in front of the screen.

Sharp’s TVs and remotes might be great, but even the best products have their limitations. While remotes are generally effective, they may not reach every corner of your home. They may run into problems in rooms with large or complex layouts: sitting rooms, kitchens, dining rooms, or any other room where a wall blocks the signal between the remote and the TV.

Although the sensor is designed to work from across the room, it’s more effective when it’s positioned in front of the TV. In some cases, if you have a large room or furniture blocking your view of the sensor, you may find that your remote control functions not working properly. If this occurs, point your remote at the front of the TV in lieu of directly at the sensor.

Re-pair your Sharp TV Remote

In some cases, even if you’ve replaced the batteries in your remote, the television may need to be re-paired with the remote before it will work. Re-pairing the two re-establishes the communication link between them. This needs to be done whenever there is a power outage or if you move multiple televisions within close proximity of each other.

See also  Roku TV Won't Turn On Red Light Blinking - Let's Fix It

Please refer to the user manual for your TV and remote control. Generally, a few steps are needed to get your remote working with your TV (for example, pressing a button on the remote control, pressing a button on the TV, or turning on the TV).

Power Reset TV

TV technology has made great advances in recent years, but it can still be prone to failures. To reset your TV, turn it off and on again. This will help refresh the device, often fixing minor issues with ease.

You will also need to restart your TV from time to time. This can help refresh the memory and make your TV perform more smoothly.

To power restart Sharp TV:

  1. Unplug your TV from the wall and leave it unplugged for up to 10 minutes.
  2. Plug your TV back in and press the power button. The device should turn on again and work properly.

Restart Remote Control

To fix Sharp TV remote not working issue, remove the batteries from the remote and push the power button on the remote for 30 seconds. Replace the batteries in the remote and plug your TV back in.

Lastly, push every button on your remote control — this will help sync your remote with your TV.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top