Samsung Dryer dE Error Code [FIXED] – KCSCFM Repair

Do you know what the Samsung Dryer dE Error code stands for? Samsung dryers show the message when there is a problem with the door. DE stands for “Door Error” and as such, you should take care of it before anything else.

Samsung dryers have been around for many years and are an industry-standard in the home appliance market. Samsung has grown to be one of the largest companies in South Korea, making them a household name nearly everywhere.

If you own a Samsung dryer, this information can help you avoid expensive repairs by being informed about how your Samsung Dryer dE Error code should be handled.

What Does The Samsung Dryer dE Error Code Mean?

If the DE Error code appeared on your Samsung dryer panel, it means that your dryer is working normally, except for the door. The problem is serious enough to prevent you from using the device, and it’s vital you act now before your laundry sees the consequences of a broken door.

Samsung Dryer dE Error Code

Samsung dryers display the dE code when the door of the machine is not properly closed. If you see this error, you have to check if the door is tight enough – chances are, it’s not. If it’s not, just press and hold the start/pause button to resume normal operation.

The D-code error on the dryer refers to the door. This error means that the door is broken. Some models use D1 or D2 as a code for this problem. Sometimes, the machine stops working during a cycle, and sometimes it stops at any stage of a cycle.

How To Fix Samsung Dryer dE Error Code

If the dE error has appeared for the first time, try to reset it

  • Disconnect your Samsung dryer plug from the wall outlet; 
  • Leave your appliance unplugged for 10-15 minutes; 
  • Return and reconnect your appliance to the wall outlet.

If the error code doesn’t appear after resetting the machine, then it was a temporary malfunction of the control unit.

If it reappears, that indicates a more significant problem. It will continue to flash until you have solved the issue.

One reason your dryer might not be working is that a foreign object is lodged in the device. To find out, open the dryer door and look for anything that might be preventing the sensor from moving freely. If there’s something there, remove it and close the door to find out if it works again.

If you get a dE error code on your Samsung dryer, make sure it is leveled horizontally and vertically. If all four appliance feet are firmly on the floor, the latch will fit securely in the hinge, allowing you to start the program.

If none of the above solutions work, you may have to check the internal parts of your Samsung dryer.

Defective Door Lock

A faulty door lock, a common Samsung dryer malfunction, can cause the dE error code to appear on your dryer’s control panel. It indicates that the door isn’t closing properly because of a mechanical problem. The lock doesn’t fit correctly, causing the door latch to fail. 

A faulty door lock will prevent the dryer from latching properly, and You will also not hear any clicking sound when closing the door. This problem is usually solved by repairing or replacing the parts.

Damaged or Broken Wiring Harness

Another Samsung dryer malfunction that can cause the dE error code to appear on your Samsung Dryer’s control panel is a damaged or broken wiring harness.

The problem comes from the wires in the door locking mechanism and needs to be repaired.

First, confirm that the breaker for the dryer is on. If it is, try resetting the breaker. Then, inspect the power cord for any frays or damage — and replace if necessary. Double-check that the outlet is working by plugging in another appliance.

When dealing with an electrical issue, the first step is to use a multimeter to pinpoint the source of the problem. If there is simply a loose connection, you can correct it by stripping and twisting the loose strands back together. If you can’t find where the problem is happening, replace all the wiring in that area.

Faulty Door Locking Mechanism

On a Samsung dryer, the door locking device often gets stuck and has an error code of DE. This problem arises because the device is not working properly, resulting in the dryer not starting after the clothing is loaded. This is due to an error code indicating that the door is not properly latched.

Dryer door locking devices can be easily damaged. Whenever you have issues with the dryer door locking device, replace it with a new one. If you are not sure how to do it, hire a specialist.

Broken Door Latch

Most door latches use a metal spring and plastic clasp to keep the door closed. If these parts are bent or broken, the door may not be able to close properly. These parts aren’t designed to last forever, so they need to be replaced periodically. When this happens, it’s usually time for other components in your dryer to be serviced as well.

If the door is not able to latch shut and make a proper connection, issues like shaking open during the process or refusing to start may arise.

To test the latch, you have to open and close the dryer door, paying attention to how firmly it slams shut. Listen for a click upon closing, then pull gently on the door to see if it opens. 

Give the latch a careful visual inspection as well — look for any scratch marks or loose screws which may be indicative of a broken latch. If the latch is broken, then replace it.

Control Module Failure

If the control module fails, a DE error code will show up, and the dryer will not power on. However, after troubleshooting the machine, you notice that it’s the door lock resistor that is causing the problem.

The way you determine what type of failure you’re experiencing will help you figure out how to fix it. If it’s a wiring failure, replace the affected part; if it’s a microcircuit burnout, replace the entire control board. Any deviation from the norm can be detected with a multimeter.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top