Samsung TV Won’t Turn ON Red Light ON [SOLVED] – Let’s Fix It

Samsung TV won’t turn ON, Red light is ON? It happens to almost every Samsung TV owner at some point in time. This guide will help you diagnose the problem, find out what is wrong with your Samsung TV, and how you can fix it.

If your TV is suddenly experiencing issues with its screen, it could be a problem with the set’s power cable or power supply. Make sure that the cord is properly connected to both the TV and the power outlet, and then check if the issue still persists. If it does, there might be an issue with the devices’ system boards.

Samsung TV Won’t Turn ON Red Light ON – Troubleshoot and Diagnosis

Power cycling your Samsung TV is a helpful tactic if the TV is not turning on and there are no other indications that it is operational: unplug the television from the wall, and then hold the “Power On” button on the TV for 15 seconds. Then, plug the television back into the wall, and then press and hold the “Power On” button to turn it on.

If your TV is experiencing issues with its operating system, you can set the TV back to its factory default settings. This will restore it to its original configuration and erase any custom settings you’ve made in the past.

Samsung TV Won't Turn ON Red Light ON

There are a few basic checks you can do before you decide to replace your TV. First, make sure that the source of your TV isn’t set to another input or that it isn’t disconnected. You can also try pressing the ‘Source’ button on your TV remote, and see if the image comes back. If it does, then the issue is that you have the wrong source selected.

1. Restart Samsung TV

We’ve provided a few steps to follow in order to determine how to get your TV to turn on again: First, restart your TV. Unplug the TV from the power socket for 15 seconds and then plug it back in. If this doesn’t work, unplug your TV from the power socket and wait a few minutes before reattaching the power cord. Then try turning on the TV again.

The reason why your TV has black screen is probably that it was on for too long, and the power IC overheated. Also this can happen if there’s a failure of the power zone of your TV.

Running a TV for long hours at a stretch can, or at least should, be avoided as it heats up. The power supply ICs in TVs can be really sensitive to overheating and even small overheating can lead to the problem you are experiencing. If the power IC is getting heated, then the best option would be to restart the TV so that it cools down.

Have you ever turned on your TV in the evening and found it frozen with a red light at the bottom? If so, Samsung has a quick fix for you. Remove your TV’s power cable for about 10 minutes. The blinking light will stop blinking once you complete this step. Next, turn on your TV and press the power button for about 1 minute, then reinsert the power cable into your TV.

2. Power Reset

If you have a Samsung TV, then you may have faced a situation where the screen goes blank or the audio doesn’t work. Maybe the TV is stuck in a loop and there is no way to exit it. This is called some kind of system loop. To solve this problem, power off your TV and wait for at least an hour. After an hour, put back the power cord in place while keeping the buttons pressed.

Surge protectors or power strips are oftentimes the culprit when something isn’t working right on your television. Yes, they help protect your electronics from electrical surges, but they can also block any wireless signals from getting to the TV, leading to a no-connection error message. To make sure you’re not running into this issue, try unplugging all power strips and surge protectors from your TV’s power source and plug in the TV directly into a wall socket.

Another way to reset your Samsung smart TV, press the volume down and menu buttons on the remote control at the same time. Hold down both buttons for 10 seconds and then release them. After waiting for 10 seconds, you will hear a beep that indicates that the tv is being initiated. Once the beep happens, you’re free to let go of the buttons. The TV will turn on automatically and should work fine with all its features again.

3. Update Firmware

To ensure the greatest possible viewing experience and for optimal TV performance, we recommend that you update the firmware periodically. Firmware updates may improve or add new functions, enhance image quality and allow for optimum compatibility and performance of your TV.

If your TV hasn’t been updated to the latest firmware, it may experience software issues that may lead to a red light problem. To fix this issue and get rid of the red light, you will need to update your TV’s firmware and then restart the TV. Your TV will work more optimally after you do this.

4. Use Correct Source

The most common reason for a TV not turning on is an incorrect source. Check the remote or TV controls to ensure that the correct input source is selected. And don’t forget to test all of the HDMI and USB cables you have connected to your TV to ensure they are secured properly.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top