Samsung washers are one of the most popular models on the market. Samsung has been manufacturing and selling washing machines for over a decade, which means that they’ve had plenty of time to perfect their products. They are known for producing durable, reliable appliances with a sleek design.
Samsung washing machines have excellent reviews from consumers who’ve owned them for an extended period of time. However, Samsung washer LE error code can still occur if there’s not enough water in the machine or if you don’t properly install it. This blog post will teach you how to fix this error code so that your Samsung appliance will be running like new again.
What Does The Samsung Washer LE Error Code Mean?
While the error code LE appears immediately after you switch on a Samsung washing machine, in most cases, the LE error is shown after a few minutes of use. In addition to this, the machine simultaneously pours and drains water from the tub.
When the Samsung washer detects a low water level during the cycle, it will give you an LE error code. This prevents the washer from functioning and the machine will not move into the spin cycle.
The Samsung washer error code LE represents a sudden leak or water drain from the machine’s tank. You will know this happened if the pressure switch records the water level drop in the drum 4 times within a few minutes. If this happens, the machine will show an error code of LE on its display and shut down.
Samsung washers have a specialized water-level sensor in the pallet that prevents the washer from overflowing. If it detects potential overfilling, this sensor will stop all water from entering the machine and prevent any damage to your laundry load.
If your Samsung washing machine is giving you the LE error code, it’s likely to be a minor issue that you can fix on your own. However, if you’re not familiar with washer repair or appliance parts, it’s best to call a local repair service instead of trying an at-home fix.
How To Fix Samsung Washer LE Error Code
If you are worried about your washing machine, then reset the Samsung washer. Try the following: –
- Unplug the appliance and let it rest for 5 to 10 minutes.
- Plug your washing machine back in.
It’s possible that there was a failure in the machine’s control module, and the brief time you have unplugged will help solve this problem.
Using Wrong Type/Quantity Of Detergent
A buildup of detergent may cause a leak. Add only the recommended amount of detergent, or use HE detergent, which is more concentrated and doesn’t leave as much residue on clothes.
If an LE error appears in your washing machine after foam starts to come out from the dispenser, it could mean two things. If you use too much detergent, or poor-quality detergent for that matter, the extra soap in the tray will trigger a leak when it mixes with water and becomes sudsy.
Solution: Use the correct detergent for the machine and remove excess water from the dispenser. Make sure you’re using the right detergent for your machine by consulting the manual.
if you wash any items that are either considered porous or very fluffy, then reduce the amount of detergent by half. The fibers will absorb and showcase increased foaming action, which could cause excessive foam inside the washing machine or dispenser and cause LE error on the screen of your washing machine.
Overstuffing your Samsung washer is the most common cause of a leaky machine. To test if this is the issue, run your machine with no clothes or bedding in it and no detergent. If it doesn’t leak, it means that you’ve been overloading it. If it still does, though, keep reading.
Water supply and drain hose
The Samsung Washer comes with three hoses, one for hot water, one for cold water, and one for draining. If you notice any leaks while the washing machine is in use, check the hoses and replace them if necessary.
If you’re experiencing leaks from the washer, the first step is to check the connections. Keeping your drain hose secure and tightened under the sink will prevent leaks from occurring during the spin cycle. If the washing machine leaks from the back or fills up with water, the water supply hose may need to be replaced.
Water supply valves
Located on the back of your washing machine, check to see if your washer’s water supply valves are secure. Is anything loose or worn out? Your washer’s valves handle the water that enters the machine from the plumbing, so if they’re damaged, you may have leaks. If this is the case, replace them as soon as possible to avoid potential damage.
Defective Pressure Switch
The pressure switch is a safety mechanism in the washing machine that is designed to turn off the water supply when the water level rises too high, preventing the machine from overflowing. The pressure switch is connected to an air tube that runs alongside the tub, and when turned on, it opens a small valve.
If the water level reaches a certain height, air begins to enter the pipe, causing the switch to change positions and shut off the water flow.
A faulty pressure switch can cause a washer tub to overflow, triggering the Samsung washer LE error code, but you should check two things before you replace the pressure switch. First, ensure that the air pipe has no splits or tears. Second, check to see if the pressure switch is defective. Replace the faulty pressure switch with a new one.
The dispenser is blocked
If you add too much detergent, or if the detergent is too thick, it can clog the dispenser drawer and cause water to leak. To fix this issue, clean the dispenser drawer with hot water and a brush.
Hi there! I’m Sam Hendricks, and I’m a repair technician and expert. I created this website to help people like you save money and time by fixing your own appliances.
Over the years, I’ve seen people spend a lot of money on unnecessary repairs or replacements. That’s why I decided to share my expertise and create easy-to-follow guides for fixing appliances on your own.