TCL TV Light Blinking Won’t Turn ON [SOLVED]

If your screen is not working on your TCL TV and you can see the power light blinking, it can be a frustrating experience. The light keeps flashing but the screen isn’t turning on.

The good news is that you aren’t alone as many people report issues with their TV and the light blinking. In this article, we will go through what to do if your TCL TV won’t turn on.

If your TV light is blinking, check if it’s connected to the internet. If it isn’t, connect it now. Then, make sure there are fresh batteries in the remote. Try unplugging and re-plugging the TV. Check your router’s status and see if any of its lights are blinking. Do a factory reset on the TV and then make sure to do a system update.

TCL TVs have a peculiar issue — their LED lights just below the TCL logo are known to stick and blink continuously, making it seem like the TV has turned off. Though this isn’t the case, users will have to spend time troubleshooting the problem. This post shows you how to fix the issue.

TCL TV Light Blinking Won’t Turn ON – Troubleshoot And Diagnosis

TCL TV Light Blinking Won't Turn ON

Why won’t my TCL TV turn on and what can I do about it? Here’s why your TCL TV won’t turn on, and how to fix it.

1. Press The Reset Button

Sometimes your TV might get stuck at the standby screen, with lights blinking. In these cases, all you need is to find the small reset button on the back of your TV, and use a paperclip or pen to press and hold it for 10 seconds. This will reset the TV. Please note that You may have to do it 3-4 times before it works.

See also  Emerson TV Won't Turn ON [Quick Solution]

The reset button may take multiple attempts to work, but don’t give up! Eventually, it should fix your TCL TV.

It might be a little bit of a pain, but it’s worth it: when your TCL TV has issues, give the reset button a good 20-30 presses. Owners of this brand have had success with this solution, so you can try it out if you’re having trouble with your TV as well.

You’ll find the reset button for your TCL TV in different places depending on the model, which can make finding it a little tricky. But if you know what to look for, it couldn’t be easier.

The reset button is usually next to the RCA, HDMI, and USB ports. Some models have these connections on one side of the TV; others on the other side or even underneath the front panel. All three of these locations are shown below for your convenience.

Reset the TCL TV and make sure it’s not just a temporary outage. In almost every case, this will be the answer.

2. Power Cycle TCL TV

Have you encountered a TCL TV issue? To help you out, we’ve put together a few troubleshooting steps to try.

Power-cycling your TCL TV is a step first and foremost. A power cycle or reset will help solve many of the most common issues faced by TCL TV owners. To complete a power cycle, follow these steps:

If you want to restart your TCL TV, unplug it from the wall for at least 30 seconds (that gives it enough time to drain any residual power). Once the time has passed, press and hold the Power button for 10 seconds. After this, plug your TV back in and turn it on again.

See also  TCL TV Black Screen Problem [Quick Solution]

3. Check Network Connection

You can check whether your TV is connected to the internet by pressing ‘Home’ on your remote control > ‘Settings’ > ‘Network’ > ‘Wireless’ > and check if you have connected to the internet.

If you still don’t see a wireless network with a good signal, your TV will begin scanning for available wireless networks, which you can then select.

If you are using an Ethernet connection then make sure that it is working. To get an ethernet cable connected to your TCL TV, you first need to find the ethernet port on the back of the TV.

You can plug one end of the ethernet cable into your router or modem and then plug the other end into the ethernet port on your TV. Next, you can press ‘Home’ on your remote > ‘Settings’ > ‘Network’ > and then select a connection method that works.

4. Check Remote Batteries

If your TV light is blinking, it’s time to change the batteries in your remote. You probably have a remote with a dead battery – and chances are you have another extra. Replace the batteries in your remote and presto – your TV will work again.

Fortunately, one of the easiest and most common problems is often solved by replacing the batteries in your remote. Simply remove the old batteries and replace them with fresh ones for a remote that works as intended. This should solve the problem and allow you to turn off your TV as needed.

See also  Why Is My Vizio SmartCast Not Working [SOLVED] - Let's Fix It

5. Backlight Problem

The backlight is one of the most fundamental components of your TCL TV, and when it goes out, your monitor goes dark. Backlighting the screen is essential for the display to be visible to you. If the backlight flickers or fails, you’ll get a blinking light and no image on your screen.

Backlight issues can be a real pain to fix. First, you’ll have to remove the back cover of the TV, which should be easy enough. Then you’ll need to locate and identify the bad LED using a multi-meter or a visual aid — it might take some time to find it. After that, you can swap out the LED and put your TV back together.

6. Contact TCL support

Let’s see what TCL says. To get in touch with TCL, you can call them at 1-877-300-8837. They’re open from 9 AM to 12 AM, ET on weekdays, and from 9 AM to 6 PM, ET on weekends.

So no matter the day, they’ll be able to help you with this issue. The TCL staff are trained to deal with problems like this and have probably dealt with similar complaints before.

TCL support is available 24/7 to help troubleshoot any technical problems. If your TV is still under warranty, you might be able to get a replacement or refund.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top