Why Is My Vizio TV Keeps Turning Off [SOLVED]

Vizio TV keeps turning off? This is a common issue and can be frustrating. Vizio has several models of TVs and this issue can occur on any of them. The good news is that you can fix it without having to spend a fortune on a repair person.

Don’t feel bad if your TV is having issues. You are not alone. Most TVs don’t last very long and Vizio is one of those brands that customers complain about the most. Why? Because they are affordable. Sometimes you get what you pay for, but in this case you don’t. This article explains what could be causing your TV to have problems and how to fix them.

However, there are simple fixes to fix any problem you encounter with your Vizio TV. You can check all the possible solutions below.

If your Vizio TV keeps turning off, it may be that the Auto-Off feature is enabled. To fix this problem, try disabling the Auto-Off setting and using the remote to change channels and adjust volume instead. If you’re still having problems with your TV turning itself off, there may be a power surge or electrical problem in the house.

Have you figured out the problem yet? No? As you can see, there are a number of issues that could be causing your problems. I’ll list each of these below along with their corresponding tips.

Vizio TV Keeps Turning Off – Troubleshoot And Diagnosis

Vizio TV Keeps Turning Off

Don’t give up on fixing your TV if it’s not working, you can’t live without it! Here are some general troubleshooting steps to fix your Vizio TV, because everyone needs to watch TV when they’re not working. If you’re still having trouble, feel free to contact customer service.

Solution 1: Hard Reset the TV

If your TV has been acting up lately, you may be tempted to buy an entirely new one. However, more often than not, a simple reset will do the trick and get your TV back to normal in no time. Here’s how to do it.

A hard reset is the act of turning off your TV, waiting a short while, and then turning it on again. The process re-syncs your screen with the TV by clearing out any errors that may be causing problems — most often associated with internet connections and poor WiFi reception.

If your television is having problems, it’s a good idea to perform a hard reset to get your TV or set-top box back into good working order.

You can do this by turning off the device and unplugging it from the electrical outlet for approximately 10 minutes. Leaving your TV off and unplugged will cause it to discharge its memory — it’s similar to rebooting your computer.

This should get your TV back to its normal state, and allow you to fix any issues that you’re experiencing.

Solution 2: Check Vizio TV Remote Batteries

One of the most common Vizio TV problems is related to the remote control not working, which leads to the Vizio television switching off. In some scenarios, it can also cause the TV to turn on and off by itself.

On the other hand, while the Vizio TV’s remote control is convenient and easy to use, it has a tendency to stop working at inconvenient times. Users have even reported issues with other remotes — including component remotes, cable and satellite remotes, and even the ones that come with their Blu-ray players — when they try to switch between the two.

Check the batteries on your Vizio remote controls. Even with fresh new ones, your Vizio TV remote might not be working correctly.

As a first troubleshooting step, remove the batteries from your remote and those of other remotes around your home to eliminate interference. Make sure there’s nothing between your TV and the remote that could be blocking the infrared signals, and try pointing the remote directly at the TV.

Solution 3: Check Remote Power Button

What if your remote control is jammed? Vizio TV remotes are some of the most commonly jammed remotes around the globe. The best way to check if your remote control is jammed is by feeling the power button and other buttons on the remote. Check each button individually to see if it feels jammed or if it’s working as expected.

When the remote doesn’t appear to be working, you may have dust particles stuck in between buttons. If a power button or other button is being pressed down with less force than it should, a cleaning is needed. Use a cotton swab to clean small spaces between buttons and remove any dust that may have accumulated there.

Vizio TV remotes can be quite fiddly and annoying due to the amount of buttons, but you shouldn’t worry because they are easy to clean. Just take an old cotton bud (Q-tip) and gently rub it along the track of each button to remove any dirt or dust that has settled there.

Solution 4: Check Connected Devices

If your TV keeps turning off and there’s no way to get it back on, the problem may lie in the unit itself or in its connection to the other devices. It could be that a recent update broke something or someone unplugged something in your unit. Also, sometimes any internal glitch in the connected devices can cause the Vizio TV turning off issue.

If your Vizio TV keeps turning off and on repeatedly for several hours, it could be due to an issue with your Vizio TV or with the devices that are connected to it. Before resetting your Vizio TV, unplug all the devices from your Vizio TV, including cable/satellite boxes, Blu-ray players and game consoles. Leave them unplugged for an hour and then plug them back in one by one.

Find the device responsible for the problem by plugging devices back in one at a time to see which is causing the problem.

There are also some issues with the HDMI CEC that may cause your TV to respond poorly. To rule this out as a source of your troubles, you should disconnect your WiFi for a few hours. You can still use other functions, like streaming or volume controls, but unplugging the device is an important step.

Solution 5: Disable CEC Function

Some TVs enable consumers to control a connected device, such as a Blu-ray player or cable box, with their TV remote. If this feature doesn’t function properly, the TV remote can send commands to your other device at inopportune times — like when you’re trying to watch a movie!

Sometimes, the CEC feature (consumer electronics control) can malfunction, which can be really annoying. Fortunately, there’s a simple way to fix this problem — just turning it off!

To turn off the CEC feature: menu > system > CEC > off. You can check if your issue is fixed!

Solution 6: Disable ‘Auto Power Off’ Feature

It’s a known issue that Vizio TVs have the tendency to turn themselves off when they are not being used. This has to do with Vizio’s Auto Off feature, which is supposed to turn off your TV automatically after a certain amount of time has passed.

To turn off the auto-off feature on a Vizio television, the steps are simple. First, find the Menu button on your Vizio remote, and then go to Timers > Auto Power Off. From here, you can turn off the option by unchecking it. Simple!

Solution 7: Update Firmware

Like most other devices with firmware, Vizio TVs need updates to fix existing issues and add new features. For example, if you have a Vizio TV that keeps turning itself off, you’ll want an update to fix that issue — and if great, Vizio can add some new features too.

Any device that runs firmware needs to be updated. But it can be a hassle for users because of the number of devices running firmware and the number of updates released by manufacturers. This is why Vizio has come up with an update solution that lets you check for updates and apply them with just one click, so you can eliminate all of your old-world problems.

First, you will need to go to the “System” section of your TV’s menu. Then, if a firmware update is available, you might have to accept it — in the same way you would any app or software update on a smartphone. Typically, your TV will prompt you to download and install it when there is an update available.

Solution 8: Plug TV Directly Into The Outlet

A power spike could be causing the problem you’re having with your Vizio TV. If this is the case, you’ll need to unplug the device and plug it back in a few minutes later. Repeat this step a couple of times right away, then continue using your Vizio TV as normal.

Perhaps your Vizio TV is experiencing power issues. Did you know that many electronic devices are connected to the same power strip? Many electronic devices, including your Vizio TV, might be drawing power from the same source (a power strip or power board) causing a spike in voltage. This can damage your equipment and cause glitching. To fix the problem, try plugging the Vizio TV directly into a wall socket — away from any other equipment.

Solution 9: Prevent Overheating

Vizio TV’s have an overheating sensor. If the TV detects overheating, it will switch itself off to protect itself from further damage. This can be caused by a variety of reasons, including poor airflow and excessive heat in the room or device. If this problem persists, you will need to set up additional ventilation in the room or keep your TV out of direct sunlight.

Your Vizio TV is overheating a bit because the processing power and heat accumulation. The best way to cool it down is to take a hand towel, fold or roll it (whatever makes you feel comfortable), and fan the back panel of your TV by moving in a circular motion for about 1-2 minutes. After that, lower your Vizio TV brightness, sharpness, contrast, and color to reduce its processing power and heat accumulation.

Solution 10: Do A Factory Reset

If the TV is unresponsive, you should first try to reboot it. If this doesn’t solve the issue, you need to reset the TV’s firmware to factory default. This is a simple procedure that will erase your saved settings and preferences on your TV, but will reinstall the original firmware and bring it back to the state when you first bought it.

If you need to reset your Vizio TV, you can use your remote to make the process easy. You will want to press the Menu button on your Vizio TV remote and go to System. Next, select Reset & Admin. Select Reset TV To Factory Defaults, then choose Reset. When the startup screen appears, enter 0 0 0 0 as the password. Wait for your Vizio TV to turn off before turning it back on again.

How Do You Fix A Vizio Tv That Keeps Turning Off

If your Vizio TV keeps turning off, there are a few things you can try to fix the problem. First, power on your TV and be sure to wait a few minutes before pressing any remote buttons. If the issue continues, try removing the batteries from the remote control and then replacing them. If there’s an option to choose a HDMI Input, reset inputs by switching between them.

You can also fix this by doing a factory reset. To do this, you will need to press the Menu button on your TV remote. The next step is to use the down arrow on the remote to select Support and press enter. Entering Support will take you to a page with several options. Scroll down until you find Factory Reset, then press enter.

How Do I Stop My Vizio Tv From Turning Off

If you have a Vizio TV that randomly turns off, there are a couple of things to look at. First, make sure that your power cord is plugged into the electrical outlet and the back of the TV. Also, make sure that your HDMI cables are connected securely to both your TV and the cable box, satellite box, or DVD player.

To stop your Vizio TV from turning off with the remote, navigate to the main menu and select “My TV settings.” Use the arrow keys to navigate down to “TV Settings” and hit enter. Under “TV Settings” you will see a drop-down menu that says “Energy Saving.” Select this option and then use the arrow keys to find “Auto Power Off” and select it.

Maybe the TV has developed an issue with one of its HDMI or cable inputs. The TV should be shut off with the remote control and unplugged from the electrical outlet to reset the TV. Then, when the TV is turned back on, it should be plugged back in.

Why Does My Vizio TV Keep Turning Off

The only thing more frustrating than a malfunctioning device is a malfunctioning device that nobody will listen to you about. And what’s worse than a bad TV? One that keeps turning itself off.

If your Vizio TV is turning off for no reason and will not turn back on, there may be a power surge or equipment failure. One possible reason for your Vizio TV turning off is a power outage. Verify that your power cord is securely plugged in and the power is on before proceeding.

Why Does My Vizio TV Turn Off When I Turn It ON

There are several possibilities as to why your Vizio TV suddenly turns off when turned on. If your Vizio TV suddenly turns off when turned on, it may be a sign that there is an electrical problem. One of the first things you should check is whether or not your remote control is causing the problem.

The Vizio TV may be experiencing a power surge from being unplugged, or it may have reached the end of its internal power supply. If the TV has not been on for a long period of time, simply unplug it for about 10 seconds, and plug it back in.

Final Thoughts

Having a Vizio TV is great — but not when you’re watching an awesome flick, and your screen suddenly goes black. Fortunately, you can troubleshoot this issue at home and fix it yourself: check the settings on your remote to see if auto shut-off or sleep mode is accidentally turned on — or reset your firmware by unplugging the TV entirely for a few minutes.

We’re happy to help you troubleshoot, and we’re excited to hear your feedback! If you need further assistance getting your TV up and running, please don’t hesitate to contact us — we’ll be here for you when you need us.

4 thoughts on “Why Is My Vizio TV Keeps Turning Off [SOLVED]”

  1. My TV out of the blues turned off it won’t turn on no even with the remote control
    I don’t know what to do can you help

  2. my vizio turns itself off randomly and will NOT turn back on. it has been off -after turning itself off- for anywhere from a couple hours to 4 and a half days. its a not-even 2 year old set. today, i finally got it to turn back on, but after about an hour, it screeched like an air raid siren, and the screen went to half green, half red with only squiggles visible. and it shut off. several times through the day, i would try it, it would turn on, but only stayed on for 15-60 minutes. it will not turn on now. i dont know if this is significant, but the back buttons have never worked. i assume i need a new tv, but i’d like an answer anyway. your answer will basically determine whether i will get another vizio. i loved the quality but 22 months is just a tad short of the lifetime i expected. thanks so much!

  3. I am gonna check my batteries on the remote as well as look for a defective or dirty remote. I have sent for Tech to call me in 24 hours cause I love being connected to my TV set!

Leave a Comment

Your email address will not be published.

Scroll to Top